刘宪虎博士简介/Dr. Xianhu Liu


  • 作者:国家橡塑模具研究发布于: 2017.02.14点击量:
  • Dr. Xianhu Liu Group----Advanced Polymer Processing

    Dr. Xianhu Liu is an associate professor at National Engineering Research Center for Advanced Polymer Processing Technology of Zhengzhou University. He received two PhD degrees respectively from the Zhengzhou University in 2015 and Friedrich-Alexander-University Erlangen-Nuremberg in 2016. He has published more than 40 papers in international journals.

    刘宪虎,男,汉族,中共党员,1985年生于山东昌乐,博士,郑州大学副教授(直聘)。目前发表SCI论文40多篇,其中3篇通讯论文入选ESI Hot paper,4篇第一作者/通讯论文入选High cited Paper,i-index指数 13。在第 22届国际会议Word Forum on Advanced Materials (POLYCHAR22)上荣获“Carl Klason Prize for the best student presentation”奖项。目前主要研究领域和方向为:多功能高分子材料、流动诱导结晶、高分子及其复合材料流变行为、共混物多相体系设计与调控等。

    Contact/联系方式

    Tel.:  186 2493 3706        E-Mail: xianhu.liu@zzu.edu.cn           Room: 802

     

    Research interests:

    Polymer processing technology;  Multifunctional polymer and composites; Flow-induced crystallization; Polymer Rheology; Oil/water separation and so on.


    Scientific responsibilities

    Reviewer for Composites Science and Technology, Carbon, Polymer, European Polymer Journal, Polymer Testing, Soft Matter, Materials and Design, Journal of Materials Science, Composites Part A, Composites Part B, Macromolecular Materials and Engineering, Industrial & Engineering Chemistry Research, Journal of Applied Polymer Science,  Engineered Science,  Advanced Composites and Hybrid Materials, etc.


    Academic and Professional Experience/学术经历:

    October 2016 – now, National Engineering Research Center for Advanced Polymer Processing Technology, Zhengzhou University

    201610-至今,郑州大学橡塑模具国家工程研究中心副教授。


    Education/教育经历:

    09.2012 - 09.2016, Institute of Polymer Materials, Friedrich-Alexander-University Erlangen-Nuremberg, MS and PhD (Advisor: Prof. Dr. rer. nat. habil. Dirk W. Schubert)

    09.2009 – 07.2015, School of Material Science and Engineering, Zhengzhou University, PhD (Advisor: Prof. Dr. Changyu Shen, academician)

    09.2005 – 07.2009, Material shaping and control engineering, School of Mechatronics Engineering, Shandong University of Science & Technology, BS


    20059-20097月, 山东科技大学机械电子工程学院材料成型及控制工程读本科,获工学学士学位;

    20099-20157月,郑州大学材料加工工程专业硕博连读,师从申长雨院士,获博士学位;

    20129-20169月,德国埃尔朗根-纽伦堡大学高分子材料专业,师从Dirk W. Schubert教授,获理学硕士学位和工学博士学位



    Publications/发表论文:
     

    (42). X. Zhang, X. Wang, X. Liu*, C. Lv, Y. Wang, G. Zheng, H. Liu, C. Liu, Z. Guo, and C. Shen, Porous Polyethylene Bundles with Enhanced Hydrophobicity and Pumping Oil-recovery Ability via Skin-peeling,ACS Sustainable Chem. Eng., DOI: 10.1021/acssuschemeng.8b03305.



    (41). F. Zhang, X. Liu*, G. Zheng*, Z. Guo, C. Liu, C. Shen, Facile Route to Improve the Crystalline Memory Effect: Electrospun Composite Fiber and Annealing, Macromolecular Chemistry and Physics, 2018, 219, 1800236. DOI: 10.1002/macp.201800236.

    This article is Selected Wiley Hot Topic: Surfaces and Interfaces

     

    (40). S. Sun, L. Zhu, X. Liu*, L. Wu, K.Dai, C. Liu, C. Shen, X. Guo, Gu. Zheng*, Z. Guo*, Superhydrophobic Shish-kebab Membrane with Self-cleaning and Oil/Water Separation Properties, ACS Sustainable Chem. Eng., 2018, 6, 9866-9875. DOI: 10.1021/acssuschemeng.8b01047.

     

     

     

    (39). G. Lv, N. Zhang*, M. Huang, C. Shen, K. Tan, X. Liu, C. Liu*, The remarkably enhanced particle erosion resistance and toughness properties of glass fiber/epoxy composites via thermoplastic polyurethane nonwoven fabric, Polymer Testing,  2018, 69, 470-477.

     

    (38). F. Luo, X. Liu*, C. Yan, H. Liu, M. Dong, X. Mai, C. Shen, C. Liu*, J. Zhang, N. Wang, Z. Guo*, Molecular orientation dependent dynamic viscoelasticity in uni-axially drawn polycarbonate, Polymer Testing, 2018, 69, 528-535. 

     

     


    (37). X. Liu, Y. Pan,* G. Zheng, H. Liu, Q. Chen, M. Dong, C. Liu,* J. Zhang, N. Wang, E.K. Wujcik, T. Li, C. Shen,* Z. Guo*, Overview of the Experimental Trends in Water-Assisted Injection Molding, 2018, 303, 1800035.

     

     

     

    (36). X. Wang, Y. Pan, Y. Qin, M. Voigt, X. Liu*, G. Zheng, Q. Chen, D.W. Schubert, C. Liu*, C. Shen, Creep and recovery behavior of injection-molded isotactic polypropylene with controllable skin-core structure, Polymer Testing, 2018, 69, 478-484

     

     


    (35). H. Qi, Q. Chen, H. Ren, Xi. Wu, X. Liu, T. Lu*, Electrophoretic deposition of dexamethasone-loaded gelatin nanospheres/chitosan coating and its dual function in anti-inflammation and osteogenesis, Colloids and Surfaces B: Biointerfaces 2018, 169, 249-256.

     

    (34). Y. Pan#, X. Guo#, G. Zheng,* C. Liu,* Q. Chen, C. Shen, X. Liu*, Shear-Induced Skin-Core Structure of Molten Isotactic Polypropylene and the Formation of β-Crystal, Macromolecular Materials and Engineering 2018, 303, 1800083.

     

     

     

    (33). Y. Pan, D.W. Schubert, J.E. Ryu, E. Wujick, C. Liu, C. Shen, X. Liu*, Dynamic oscillatory rheological properties of polystyrene/poly(methyl methacrylate) blends and their composites in the presence of carbon black, Engineered Science 2018, 1, 86-94..

     

     

     

    (32). Q. Chen, J. Jing, H. Qi, I. Ahmed, H. Yang, X. Liu, T. Lu, A.R. Boccaccini, Electric Field-Assisted Orientation of Short Phosphate Glass Fibers on Stainless Steel for Biomedical Applications, ACS Appl. Mater. Interfaces, 2018, 10, 11529-11538.

    (31). Z. Lu, Y. Pan, X. Liu*, G. Zheng, D.W Schubert, C. Liu, Molar mass and temperature dependence of rheological properties of polymethylmethacrylate melt, Materials Letters 2018, 221, 62-65.

     

     

    (30). J. Jiang, X. Liu*, M. Lian, Y. Pan, Q. Chen, H. Liu, G. Zheng*, Z. Guo, D.W. Schubert, C. Shen, C. Liu*, Self-reinforcing and toughening isotactic polypropylene via melt sequential injection molding, Polymer Testing 2018, 67, 183-189.

     This article is Selected 2018 Hot Paper

     

    (29). F. Luo, X. Liu*, C. Shao, J. Zhang, C. Shen, Z. Guo*, Micromechanical analysis of molecular orientation in high-temperature creep of polycarbonate, Materials and Design 2018, 144, 25-31.

     This article is Selected 2018  Highly Cited Paper  

     

    (28). X. Liu, M. Lian, Y. Pan, X. Wang, G. Zheng*, C. Liu*, D.W. Schubert, C. Shen*, An Alternating Skin-Core Structure in Melt Multi-Injection-Molded Polyethylene, Macromolecular Materials and Engineering 2018, 303, 1700465.

     This article is Selected 2018 Highly Cited Paper  

     

    (27). Y. Li, B. Zhou, G. Zheng*, X. Liu,* T. Li, C. Yan,  C. Cheng, K. Dai, C. Liu, C. Shen and Z. Guo*, Continuously prepared highly conductive and stretchable SWNT/MWNT synergistically composited electrospun thermoplastic polyurethane yarns for wearable sensing, Journal of Materials Chemistry C 2018, 6, 2258-2269.

    This article is Selected 2018 Hot Paper & Highly Cited Paper  

     

     

     

    (26). X. Wang, X. Liu*, H. Yuan, H. Liu, C. Liu*, T. Li, C. Yan, X. Yan, C. Shen, Z. Guo*, Non-covalently functionalized graphene strengthened poly(vinyl alcohol), Materials and Design 2018, 139, 372–379.

    This article is Selected 2018 Hot Paper & Highly Cited Paper 

     

     

    (25). Y. Wang, X. Liu*, M. Lian, G. Zheng*, K. Dai, Z. Guo, C. Liu*, C. Shen, Continuous fabrication of polyner microfiber bundles with interconnected microchannels for oil/water separation, Applied Materials Today 2017, 9:77-81

     

     

    (24). M. Qu, F. Nilsson, Y. Qin, G. Yang, Y. Pan, X. Liu, G. Rodriguez, J. Chen, C. Zhang, D.W. Schubert, Electrical conductivity and mechanical properties of melt-spun ternary composites comprising PMMA, carbon fibers and carbon black, Composites Science and Technology 2017, 150:24-31

    (23). Z. Liu, X. Liu, G. Zheng*, K. Dai, C. Liu*, C. Shen, R. Yin, Z. Guo, Mechanical enhancement of melt-stretched β-nucleated isotactic polypropylene: The role of lamellar branching of β-crystal, polymer testing 2017, 58, 227-235

    (22). Y. Pan, X. Liu*, J. Kaschta, C. Liu, D.W. Schubert*, Reversal phenomena of molten immiscible polymer blends during creep-recovery in shear, Journal of Rheology 2017, 61:759~767

     

     

    (21). Y. Pan#, X. Liu#*, J. Kaschta, X. Hao, C. Liu*, D.W. Schubert*, Viscoelastic and electrical behavior of poly(methyl methacrylate)/carbon black composites prior to and after annealing, Polymer 2017, 113:34~38

     

     

    (20). Y. Pan, X. Liu*, X. Hao, D.W. Schubert*, Conductivity and phase morphology of carbon black-filled immiscible polymer blends under creep: an experimental and theoretical study, Physical Chemistry Chemical Physics 2016, 18:32125~32131

     

     

    (19). Y. Pan, X. Liu*, S. Shi, C. Liu, K. Dai, R. Yin*, D.W. Schubert, G. Zheng*, C. Shen, Annealing Induced Mechanical Reinforcement of Injection Molded iPP Parts, Macromolecular Materials and Engineering 2016, 301:1468~1472.

     

     

    (18). Y. Pan, X. Liu*, X. Hao, Z. Starý, D.W. Schubert*, Enhancing the electrical conductivity of carbon black-filled immiscible polymer blends by tuning the morphology, European Polymer Journal, 2016, 78:106~115

     

     

    (17). X. Liu*, D.W. Schubert*, Influence of the pressure-dependent contact area between electrode and composite surface on the electrical conductivity, Composite Structures 2016, 136:414~418

     

     

    (16). X. Liu, Y. Pan, G. Zheng* and C. Liu*, Suppression of the hierarchical structure of water-assisted injection moulded iPP in the presence of a beta-nucleating agent and lamellar branching of a beta-crystal, RSC Advances 2016, 6:68969~68972

     

     

    (15). X. Liu*, Y. Pan, X. Hao, K. Dai, D.W. Schubert*, The role of conductive pathways in the conductivity and rheological behavior of poly(methyl methacrylate)-graphite composites, Journal of Applied Polymer Science 2016, 133:43810

     

     

    (14). X. Liu, Y. Pan, C. Peng, X. Hao, G. Zheng, D.W. Schubert, C. Liu, C. Shen, Twisted lamellae in water-assisted injection molded high density polyethylene, Materials Letters 2016, 172:19~22

     

     

    (13). X. Liu*, Y. Pan, G. Zheng, D.W. Schubert*, Rheological and electrical behavior of poly(methyl methacrylate)/carbon black composites as investigated by creep recovery in shear, Composites Science and Technology 2016, 128:1~7

     

     

    (12). X. Hao*, J. Kaschta, Y. Pan, X. Liu, D.W. Schubert, Intermolecular cooperativity and entanglement network in a miscible PLA/PMMA blend in the presence of nanosilica, Polymer 2016, 82, 57-65

    (11). X. Hao*, J. Kaschta, X. Liu, Y. Pan, D.W. Schubert, Entanglement network formed in miscible PLA/PMMA blends and its role in rheological and thermo-mechanical properties of the blends,Polymer 2015, 80, 38-45.

    (10). Z. LiuX. LiuG. Zheng*K. DaiC. LiuC. Shen, New insight into lamellar branching of beta-nucleated isotactic polypropylene upon melt-stretching: WAXD and SAXS studyJournal of Materials Science 2015, 50, 599-604

    (9). X. Liu, J. Krückel, D.W. Schubert*, Building and testing a simple setup to investigate the electrical properties of polymer/carbon black composites, Composite Structures 2015, 129:55~59

     

     

    (8). X. Liu, J. Krückel, G. Zheng, D.W. Schubert*, Electrical conductivity behaviour of sheared poly(methyl methacrylate)/carbon black composites, Composites Science and Technology 2014, 100:99-104

     

    (7). Y. WeiZ. Li, X. LiuK. Dai*, G. ZhengC. LiuJ. ChenC. Shen, Temperature-resistivity characteristics of a segregated conductive CB/PP/ UHMWPE composite, Colloid and Polymer Science 2014, 292, 2891-2898

    (6). X. Liu, J. Krückel, G. Zheng, and D.W. Schubert*, Mapping the Electrical Conductivity of Poly(methyl methacrylate)/Carbon Black Composites Prior to and after Shear, ACS Applied Materials & Interfaces 2013, 5:8857-8860

     

     

    (5). X. Liu, K. Dai, X. Hao, G. Zheng,* C. Liu,* D.W. Schubert, and Changyu Shen, Crystalline Structure of Injection Molded beta-Isotactic Polypropylene: Analysis of the Oriented Shear Zone, Industrial & Engineering Chemistry Research 2013, 52:11996-12002

     

     

    (4). X. Liu, C. Zhang, K. Dai, G. Zheng*, C. Liu* and C. Shen, Unexpected molecular weight dependence of shish kebab in water-assisted injection molded HDPE, Polymers for Advanced Technologies 2012, 24:270~272

     

     

    (3). G. Zheng,Z. Jia,X. Liu,B. Liu,X. Zhang,K. Dai,C. Shao,X. Zheng,C. Liu*,W. Cao,J. Chen,X. Peng,Q. Li,C. Shen*,Enhanced Orientation of the Water-Assisted Injection-Molded iPP in the Presence of Nucleating Agent,Polymer Engineering and Science 2012,52, 725-732

    (2). X. Liu, G. Zheng*, Z. Jia, S. Li, C. Liu, Y. Zhang, C. Shao, K. Dai, B. Liu, Q. Zhang, S. Wang, C. Liu, J. Chen, X. Peng, C. Shen*. The hierarchical structure of water-assisted injection molded high density polyethylene: Small angle X-ray scattering study, Journal of Applied Polymer Science 2012, 125:2297-2303.

     

    (1). X. Liu, G. Zheng*, K. Dai, Z. Jia, S. Li, C. Liu*, J. Chen, C. Shen, Q. Li. Morphological comparison of isotactic polypropylene molded by water-assisted and conventional injection molding, Journal of Materials Science 2011, 46:7830-7838.

     

     

     

     

     

    Conference/会议:

    14. Wang X, Liu CT, Shen CY, Liu XH. Injection-molded iPP with controllable skin-core structure. The 5th International Conference on Multi-Functional Materials and Structures. Shenyang, China, 2018

    13. Zhang XD, Wang YM, Liu CT, Shen CY, Liu XH. Skin-peeled porous PE bundles with enhanced hydrophobicity and pumping oil-recovery ability. The 5th International Conference on Multi-Functional Materials and Structures. Shenyang, China, 2018

    12. Liu XH, Zheng GQ, Liu CT, Shen CY, Self-reinforced polymer parts via melt sequential injection molding. The 5th International Conference on Multi-Functional Materials and Structures. Shenyang, China, 2018

    11. Liu XH, Li YH, Zheng GQ, Liu CT, Continuous Electrospun CNTs/TPU Yarns with Highly Conductive and Stretchable Properties for Wearable Electronics. The 8th Asia-Europe Symposium on Processing and Properties of Reinforced Polymers. Chengdu, China, 2017

    10. 刘宪虎. 第十六届全国青年材料科学技术研讨会. 天津, 中国, 2017

    9. 刘宪虎. 第三届高分子成型加工及其产业发展研讨会. 南昌, 中国, 2017

    8. 刘宪虎. 2017年第十一届复杂流体流变学学术研讨会. 兰州, 中国, 2017

    7. Liu XH, Pan YM, Zheng GQ, Schubert DW. Rheological and Electrical Behavior of Poly(methyl methacrylate)/Carbon Black Composites As Investigated by Creep Recovery in Shear. 24th Annual World Forum on Advanced Materials. Poznan, Poland, 2016.

    6. Liu XH, Pan YM, Zheng GQ, Schubert DW. Annealing induced rheological and electrical conductivity variations in carbon black filled polymer composites. 14th Bayreuth Polymer Symposium (BPS’15). Bayreuth, Germany, 2015.

    5. Liu XH, Schubert DW. Influence of the pressure dependent contact area between electrode and composite surface on the electrical conductivity. 18th International Conference on Composite Structures (ICCS18). Lisbon, Portugal, 2015.

    4. Liu XH, Krückel J, Schubert DW. Rheological and electrical properties of polymethylmethacrylate filled with graphite. 10th Annual European Rheology Conference (AERC10). Nantes, France, 2015.

    3. Liu XH, Krückel J, Schubert DW. Building and testing a simple set up to investigate the conductivity of polymer/carbon black composites. 1st International Conference on Computational and Experimental Methods for Composite Materials and Structures. Harbin, China, 2014.

    2. Liu XH, Krückel J, Schubert DW. Mapping the electrical conductivity of carbon black filled composites prior to and after shear. 22nd Word Forum on Advanced Materials. Stellenbosch, South Africa, 2014. Awarded with “Carl Klason Prize for the best student presentation”

    1. Liu XH, Krückel J, Schubert DW. Mapping of the electrical resistance for PMMA/CB nanocomposite. 29th International Conference of the Polymer Processing Society (PPS29). Nuremberg, Germany, 2013.

     

     

     

    新闻动态

    科研成果