姓    名

侯俊吉

职    称

副教授

研究方向

材料加工工程

邮    箱

junjihou@zzu.edu.cn

教育和科研工作经历：

2019.10–至今，郑州大学，材料科学与工程学院，讲师/副教授

2013.09–2019.09，山东大学，材料科学与工程，工学博士

2009.09–2013.06，山东大学，材料成型及控制工程，工学学士

研究介绍：

围绕聚合物微孔发泡成型理论、工艺、模具及装备，发展了聚合物多孔材料泡孔结构及性能调控方法，实现了聚合物轻量化材料的可控制备及功能化应用，主持了国家自然科学基金青年科学基金（C类）、河南省重点研发与推广专项（科技攻关）等项目，相关成果发表在Composites Part B: Engineering、ACS Sustainable Chemistry & Engineering、Composites Communications等期刊。

代表性论著：

[1] Youjin He, Junji Hou*, Jingbo Chen*. Tailoring foaming behavior of poly(lactic acid) by different geometric sizes of bio-based polyamide. International Journal of Biological Macromolecules, 2025, 307: 141920.

[2] Dongxu Tian, Junji Hou*, Jinkai Liang, Jingbo Chen. Fabrication of polypropylene/carbon fiber/carbon black composite foam bonded with continuous carbon fiber reinforced polypropylene prepregs via high-pressure foam injection molding. Composites Part B: Engineering, 2025, 291: 112006.

[3] Yimu Qiao, Junji Hou*, Dongxu Tian, Youjin He, Jingbo Chen*. Poly(butylene adipate-co-terephthalate)/carbon fiber foam bonded with continuous carbon fiber reinforced polypropylene prepregs for electromagnetic interference shielding. Composites Communications, 2025, 53: 102217.

[4] Kesong Yu, Junji Hou*, Dongxu Tian, Xiaoli Zhang, Jingbo Chen*. Biodegradable and structure-tunable poly(lactic acid) foam prepared by temperature-induced CO₂ foaming. ACS Sustainable Chemistry & Engineering, 2024, 12(29): 10947–10957.

[5] Yichen Bai, Junji Hou*, Kesong Yu, Jinkai Liang, Xiaoli Zhang, Jingbo Chen*. Three-layered PBAT/CNTs composite foams prepared by supercritical CO₂ foaming for electromagnetic interference shielding. Materials Today Sustainability, 2024, 26: 100763.

[6] Kesong Yu, Dong Wang, Junji Hou*, Xiaoli Zhang, Jingbo Chen. Fabrication of poly(lactic acid) foam with high expansion ratio and oriented cellular structure by restricting cold crystallization. International Journal of Biological Macromolecules, 2023, 251: 126463.

[7] Kesong Yu, Yi Wu, Xiaoli Zhang, Junji Hou*, Jingbo Chen*. Microcellular open-cell poly(L-lactic acid)/poly(D-lactic acid) foams for oil-water separation prepared via supercritical CO₂ foaming. Journal of CO₂ Utilization, 2022, 65: 102219.

[8] Yi Wu, Kesong Yu, Xiaoli Zhang, Junji Hou*, Jingbo Chen*. Lightweight electromagnetic interference shielding poly(L-lactic acid)/poly(D-lactic acid)/carbon nanotubes composite foams prepared by supercritical CO₂ foaming. International Journal of Biological Macromolecules, 2022, 210: 11–20.

[9] Junji Hou*, Guoqun Zhao*, Guilong Wang. Polypropylene/talc foams with high weight-reduction and improved surface quality fabricated by mold-opening microcellular injection molding. Journal of Materials Research and Technology, 2021, 12: 74–86.

[10] Junji Hou, Guoqun Zhao*, Lei Zhang, Guilong Wang, Bo Li. High-expansion polypropylene foam prepared in non-crystalline state and oil adsorption performance of open-cell foam. Journal of Colloid and Interface Science, 2019, 542: 233–242.