[1]Peng Fu, Haimei Li, Jin Gong, etal. 4D printing of polymers: Techniques, materials, and prospects, Progress in Polymer Science, 2022 e101506. |
[2]Z.-H. Xiao, X.-Q. Hou,S.-S. Hwang, H.-M. Li. The biocomposites properties of compounded poly(lactic acid) with untreated and treated spent coffee grounds, J. Appl. Polym. Sci. 2022, e53092. |
[3]G. Li, M. Hao, Y. Chen,et al. Nonisothermal crystallization behavior and mechanical properties of poly(lactic acid)/ramie fiber biocomposites, Polym. Compos. 2022, 43(5), 2759. |
[4]Guili Li, Xunqin Hou, Haimei Li* et al. Interfacial cylindrite of Polly(lactic acid) induced by pulling a single glass fiber, European Polymer Journal, 2019, 114(2):127-133. |
[5]Xuqin Hou, Xingyuan Chen, Baochen Liu, et al. Fracture and orientation of long‐glass‐fiber‐reinforced Polypropylene during injection molding. Polymer Engineering & Science, 60(1):13-21, 2019. |
[6]Haimei Li, Guili Li, Xuqin Hou, et al. Core melt temperature effects on cylindritic structures of co-injection molded polypropylene parts. International Communications in Heat and Mass Transfer, 97(10): 56-63, 2018. |
[7]Shia-Chung Chen*, Haimei Li, Peng-Ming Hsu,et al. Effect of processing parameters on tensile strength of thin-wall HDPE parts injection molded by ultra-high-speed process, Polymer-Plastics Technology and Engineering, 2011,50(3): 276-281 |
[8]Peng YY, Turng LS, Li HM et al. A study of the relationship between the rheo-dielectric effect and the elasticity of viscoelastic materials, Journal of Rheology, 2011, 55(2): 301-311 |
[9]Shia-Chung Chen, Haimei Li, Shih-Tsun Huang, et al. Effect of decoration film on mold surface temperature during in-mold decoration injection molding process, International Communications in Heat and Mass Transfer, 2010, 37(5): 501-505. |
[10] Lin, Y.W., Li, H.M., Chen, S-C., Shen, C.Y. 3D numerical simulation of transient temperature field for lens mold embedded with heaters. International Communications in Heat and Mass Transfer, 2005, 32(9), 1221-1230. |
|
