个人简历：

2019/10–至今，郑州大学，材料科学与工程学院，讲师/副教授

2013/09–2019/09，山东大学，材料科学与工程，工学博士

2009/09–2013/06，山东大学，材料成型及控制工程，工学学士

教学情况：

材料产业项目管理、塑料模具CAD/CAE基础

研究领域：

[1] 轻量化聚合物材料成型工艺、模具与装备

[2] 聚合物材料成型数值模拟

[3] 聚合物多孔材料功能化

部分结项及在研项目如下：

[1] 国家自然科学基金青年科学基金项目（2022–2024），主持

[2] 河南省重点研发与推广专项（科技攻关）项目（2021–2022），主持

部分发表论文：

[1] D. Tian, J. Hou*, J. Liang, J. Chen. Fabrication of   polypropylene/carbon fiber/carbon black composite foam bonded with continuous   carbon fiber reinforced polypropylene prepregs via high-pressure foam   injection molding. Composites Part B: Engineering, 2025, 291: 112006.

[2] Y. Qiao, J. Hou*, D. Tian, Y. He, J. Chen*. Poly(butylene adipate-co-terephthalate)/carbon   fiber foam bonded with continuous carbon fiber reinforced polypropylene   prepregs for electromagnetic interference shielding. Composites Communications, 2025, 53: 102217.

[3] K. Yu, J. Hou*, D. Tian, X. Zhang,   J. Chen*. Biodegradable   and structure-tunable poly(lactic acid) foam prepared by temperature-induced   CO₂ foaming. ACS Sustainable Chemistry & Engineering, 2024, 12(29):   10947–10957.

[4] Y. Bai, J. Hou*, K. Yu, J. Liang, X. Zhang, J. Chen*. Three-layered PBAT/CNTs composite   foams prepared by supercritical CO₂ foaming for electromagnetic   interference shielding. Materials Today Sustainability, 2024, 26: 100763.

[5] K. Yu, D. Wang, J. Hou*, X. Zhang,   J. Chen. Fabrication of poly(lactic acid) foam with high expansion ratio and   oriented cellular structure by restricting cold crystallization. International Journal of Biological   Macromolecules, 2023, 251: 126463.

[6] K. Yu, Y. Wu, X. Zhang, J. Hou*, J. Chen*. Microcellular open-cell poly(L-lactic   acid)/poly(D-lactic acid) foams for oil-water separation prepared via   supercritical CO₂ foaming. Journal of CO₂ Utilization,   2022, 65: 102219.

[7] Y. Wu, K. Yu, X. Zhang, J. Hou*, J.   Chen*. Lightweight electromagnetic interference shielding poly(L-lactic   acid)/poly(D-lactic acid)/carbon nanotubes composite foams prepared by   supercritical CO₂ foaming. International Journal of Biological   Macromolecules, 2022, 210: 11–20.

[8] J. Hou*, G. Zhao*, G. Wang.   Polypropylene/talc foams with high weight-reduction and improved surface   quality fabricated by mold-opening microcellular injection molding. Journal   of Materials Research and Technology, 2021, 12: 74–86.