(1) Li J, Zhang Z, Gao R, Li X, Sun G, Zhou Z, Feng R, Qi H, Zhang D, Zhao Z, Xing S, Wu D, Zhu L*, Ma C*, “Resource utilization of microcrystalline magnesite: Synthesis of magnesium oxide by malic acid steam-assisted decomposition method for the synergetic adsorption of Congo red dye and Cu(II) ion”, Environmental Research, 2025, 271: 121136-121149. (2) Li J, Li Y, Zhang Z, Gao R, Zhao Z, Xing S, Wu D, Qi H, Zhang D, Tian X, Liu C, Zhu L*, Ma C*, “Carboxylic acid-assisted hydration for the preparation of mesoporous magnesium hydroxide/magnesium oxide with ultra-high adsorption performance and selective adsorption: Experiments and DFT investigations”, Applied Surface Science, 2025, 684: 161849-161862. (3) Li J, Zhang Z, Li Y, Gao R, Feng R, Pan L, Liu G, Ma C*, Zhu L*, “Citric acid steam-assisted decomposition method for the synthesis of meso-macroporous magnesium oxide with rich oxygen defects: Efficient removal and convenient recovery property of Congo red and Ni (II)”, Ceramics International, 2024, 50(18): 31884-31895. (4) Li J, Zhang X, Zhang Z, Li Y, Zhu L*, “Preparation of LDHs-derived Co-Ni3N heterostructure modified porous carbon nanofibers as advanced interlayers for lithium-sulfur batteries”, Journal of Alloys and Compounds, 2024, 971, 172731. (5) Zhu L*, Li S, Gao Z, Zhang X, Zhang L, Ye G, Li H *, Liu G *, “Effect of in situ formed acicular mullite whiskers on thermal shock resistance of alumina-mullite refractories”, Journal of the Australian Ceramic Society, 2023, 57(59): 259-266. (6) Li N, Wang X, Mu Y, Zhang R, Zhu L*, Ye G*, “Mechanical property and phase evolution of the hydrates of CAC-bonded alumina castables during drying at 110 ºC”, Construction and Building Materials, 2021, 266(Part A): 120962. (7) Zhu L*, Liu L, Sun C, Zhang X, Zhang L, Gao Z, Ye G, Li H*, “Low temperature synthesis of polyhedral α-Al2O3 nanoparticles through two different modes of planetary ball milling”, Ceramics International, 2020, 46(18): 28414-28421. (8) Zhu L*, Zhang X, Liu L, Gao Z, Zhang L, Zhang P, Ye G, Li H, Liu Q, “Effect of the water-soluble calcium chloride on volumetric stability and thermal shock resistance of corundum-based castables”, Ceramics International, 2020, 46(8): 10647-10651. (9) Li Y, Zhu L*, Liu K, Ding D, Zhang J, Ye G, “Effect of curing temperature on volume stability of CAC-bonded alumina-based castables”, Ceramics International, 2019, 45(90): 12066-12071. (10) Gu W, Zhu L*, Shang X, Ding D, Liu L, Chen L, Ye G, “Effect of particle size of calcium aluminate cement on volumetric stability and thermal shock resistance of CAC-bonded castables”, Journal of Alloys and Compounds, 2019, 772: 637-641. |