牛佳慧
牛佳慧，讲师，硕士生导师。2024年12月毕业于山东大学机械工程专业，获工学博士学位。自2025年1月入职郑州大学机械与动力工程学院从事教学与科研工作。
主要研究方向：高效精密加工技术；抗疲劳制造基础理论与方法；超声滚压。主持国家自然科学基金项目1项。在本学科高水平国际期刊International Journal of Machine Tools and Manufacture、Corrosion Science、Journal of Alloys and Compounds等发表学术论文20余篇，获得授权专利1项。担任《组合机床与自动化加工技术》青年编委。
招生专业：机械制造及其自动化、机械工程
通讯地址：河南省郑州市科学大道100号郑州大学机械与动力工程学院
电子邮箱：niujiahui@zzu.edu.cn
教育经历：
2019年09月-2024年12月 山东大学（机械工程） 博士（导师：黄传真教授）
2016年09月-2019年06月 山东大学（机械制造及其自动化） 硕士（保送，导师：黄传真教授）
2012年09月-2016年06月 山东大学（机械设计制造及其自动化） 学士（卓越工程师班）
工作经历：
2025年1月至今 郑州大学 机械与动力工程学院 讲师
承担课程：
主讲本科生课程《工程材料及成型技术》
近年来主持及参与的科研项目：
[1] 2026.1至今，国家自然科学基金青年项目（C类），52505529，30万，主持。
[2] 2021.1至2024.12，国家自然科学基金面上项目，52075300，58万元，参与。
近年来代表性论文及专利：
[1] Jiahui Niu, Chuanzhen Huang, Zhenyu Shi, Hanlian Liu, Zhengyi Tang, Rui Su, Zhen Chen, Binghao Li, Zhen Wang, Longhua Xu. A chip formation mechanism taking into account microstructure evolution during the cutting process: Taking compacted graphite iron machining as an example[J]. International Journal of Machine Tools and Manufacture, 2024, 198: 104150. （中科院1区TOP期刊，IF=24.097）
[2] Xinjun Zhang, Shuo Hao, Shujian Cao, Han Jiang , Guangtao Xu a b, Gang Wang , Jiong Zhang , Jiahui Niu#, Lingxiao Li#. Hydrogen embrittlement in low-alloy steel with heterogeneous gradient structures: Competing mechanisms within the surface metamorphosed layer[J]. Corrosion Science, 2026, 268: 113936.（通讯作者，中科院1区TOP期刊，IF=10.304）
[3] Jiahui Niu, Chuanzhen Huang, Zhenyu Shi, et al. Some new findings on formation mechanisms of the machined surface geometric quality of compacted graphite iron[J], Journal of Alloys and Compounds, 2025, 1010: 178120. （中科院2区，IF=6.701）
[4] Jiahui Niu, Chuanzhen Huang, Zhenyu Shi, et al., A new modeling approach for stress–strain relationship taking into account strain hardening and stored energy by compacted graphite iron evolution. Frontiers of Mechanical Engineering, 18(4): 45 (2023). （中科院3区，IF=4.996）
[5] Ronglai Xie1, Jiahui Niu1, Xinjun Zhang, Shujian Cao, Minghan Sun, Jiong Zhang, Minghao Zhao, Lingxiao Li. Mechanism of dynamic recrystallization behavior in low-alloy steel during vibration-assisted hot forming[J].Journal of Materials Research and Technology, 2026, 44: 3030-3048. （共同第一作者，中科院2区，IF=7.296）
[6] Jiahui Niu, Chuanzhen Huang, Rui Su, Guoyan Jiang, Hanlian Liu. Constitutive equation of compacted graphite iron (GJV450) at high temperature and high strain rate[J]. International Journal of Advanced Manufacturing Technology, 2021, 113(7): 2163-2174.（中科院3区，IF=3.698）
[7] Jiahui Niu, Chuanzhen Huang, Chengwu Li, Bin Zou, Longhua Xu, Jun Wang, Zhanqiang Liu. A comprehensive method for selecting cutting tool materials[J]. International Journal of Advanced Manufacturing Technology, 2020, 110(1): 229-240.（中科院3区，IF=3.698）
[8] Jiahui Niu, Chuanzhen Huang, Rui Su, Bin Zou, Jun Wang, Zhanqiang Liu, Chengwu Li. Study on surface integrity of compacted graphite iron milled by cemented carbide tools and ceramic tools[J]. International Journal of Advanced Manufacturing Technology, 2019, 103(9): 4123-4134.（中科院3区，IF=3.698）
[9] Zhengyi Tang, Chuanzhen Huang, Zhenyu Shi, Binghao Li, Hanlian Liu, Jiahui Niu, Zhen Chen, Guoyan Jiang. A new characterisation method for stress, hardness, microstructure, and slip lines using the stored energy field in the cutting deformation zones of workpiece[J]. International Journal of Machine Tools and Manufacture, 2022, 178: 103891.（中科院1区TOP期刊，IF=24.097）
[10] Zhengyi Tang, Chuanzhen Huang, Jiahui Niu, Guoyan Jiang, Binghao Li, Zhen Chen, Hanlian Liu. The relation among the stored energy, microstructure and hardening effect of SA508-III steel under different deformation conditions[J]. Materials Science and Engineering: A, 2022, 847: 143333.（中科院1区Top，IF=7.898）
[11] Fujun Ma, Chuanzhen Huang, Jiahui Niu, Limei Wang, Hanlian Liu, Xiaolan Bai. Toughening mechanisms of Al2O3-matrix composites with SiC whiskers[J]. Ceramics International, 2022, 48(12): 17556-17563.（中科院1区，IF=5.998）
[12] Longhua Xu, Chuanzhen Huang, Jiahui Niu, et al., Prediction of cutting power and surface quality, and optimization of cutting parameters using new inference system in high-speed milling process. Advances in Manufacturing, 9: 388-402 (2021).（中科院2区，IF=3.898）
[13] Limei Wang, Hanlian Liu, Chuanzhen Huang, Jiahui Niu, Xuefei Liu, Peng Yao. Three-dimensional transient cutting tool temperature field model based on periodic heat transfer for high-speed milling of compacted graphite iron[J]. Journal of Cleaner Production, 2021, 322: 129106.（中科院1区Top，IF=10.697）
[14] Zhengyi Tang, Chuanzhen Huang, Rui Su, Hanlian Liu, Jiahui Niu, Zhen Chen, Binghao Li, Ziwu Liu. Analysis of chip formation and load distribution during deep hole drilling by applying micro irreversible entropic thermodynamics and an improved friction model considering boundary lubrication conditions[J]. Journal of Manufacturing Processes, 2025, 155: 1133-1146.（中科院1区Top，IF=7.797）
[15] Zhen Chen, Chuanzhen Huang, Zhenyu Shi, Hanlian Liu, Jiahui Niu, Binghao Li, Zhengyi Tang, Zhen Wang, Longhua Xu, Shuiquan Huang. A modified Johnson-Cook constitutive model of Inconel 690 weld overlay taking into account the strain rate softening effect[J]. Materials Today Communications, 2024, 41: 110551.（中科院3区，IF=4.904）
[16] Binghao Li, Chuanzhen Huang, Zhen Chen, Hanlian Liu, Jiahui Niu, Jun Wang, Zhen Wang, Longhua Xu, Shuiquan Huang. Change of the machined hole wall surface roughness, microstructure and microhardness of low alloy steel caused by drill-guide-pads during BTA deep hole drilling[J]. International Journal of Advanced Manufacturing Technology, 2025, 139(3): 1595-1605.（中科院3区，IF=3.698）
[17] Zhengyi Tang, Chuanzhen Huang, Rui Su, Hanlian Liu, Jiahui Niu, Zhen Chen, Binghao Li. Effects of the stored energy inside the deformation zones of metal workpieces on the machining and service processes of machined parts: a review[J]. International Journal of Advanced Manufacturing Technology, 2025, 140(1): 63-89.（中科院3区，IF=3.698）
[18] Zhen Chen, Chuanzhen Huang, Hanlian Liu, Binghao Li, Jiahui Niu, Zhengyi Tang, Zhen Wang, Longhua Xu, Shuiquan Huang. Surface integrity and modification of SA508Gr. 3Cl. 2 RPV steel induced by high-speed face milling process[J]. International Journal of Advanced Manufacturing Technology, 2024, 133(5): 2639-2653.（中科院3区，IF=3.698）
[19] Binghao Li, Chuanzhen Huang, Hanlian Liu, Zhen Chen, Zhengyi Tang, Jiahui Niu, Jun Wang, Zhen Wang, Longhua Xu, Shuiquan Huang. Drill wear and its effect on surface integrity in BTA deep hole drilling of heterogeneous materials[J]. Wear, 2026: 206643.（中科院1区Top，IF=7.203）
[20] 王宵衣, 牛佳慧#. 陶瓷刀具铣削蠕墨铸铁的表面几何特性分析[J]. 工具技术, 2026, 60(4): 44-54.（通讯作者）
[21] 李凌霄, 张新军, 牛佳慧, 郝硕, 刘治华. 双相梯度不锈钢应力配分及协调变形机制[J]. 钢铁, 2025, 60(9): 133-145.
[22] 于毅, 黄传真, 牛佳慧, 徐龙华. 基于消息队列遥测传输协议的切削数据主动推送系统设计[J]. 工具技术, 2019, 53(5): 46-50.
[23] 姚鹏, 牛佳慧, 黄传真, 张志宇, 薛栋林, 朱洪涛, 王冲. 反应烧结碳化硅表面残留物的磨料水射流选择性去除方法[P]. 发明专利: ZL 201710014820.X，2019-02-22.
