代表性论文

作者: 时间:2025-06-09 点击数:

机械与动力工程学院代表性论文(2024-2025年)

序号

论文题目

期刊

作者(第一和通讯作者)

发表年份

1

Investigating 4E analyses and multi-objective optimization of a novel data center compression/ejection transcritical CO2 cooling system

Applied Thermal Engineering

秦翔,王光辉

2025

2

Catalytic enhancement of MOF-derived Fe@C catalysts inmicrowave-assisted co-pyrolysis: synergistic integration with bamboo-based pyrolytic char and microwave carbonization

Energy

李攀,陈佳恒

2025

3

Characterization and mechanistic insights into coke formation on
biochar-based catalysts under microwave-assisted biomass pyrolysis

Industrial Crops & Products

李攀

2025

4

Investigation of transition metal-modified biochar as catalysts in the co-pyrolysis of corn cob and polyethylene for enhanced hydrogen production

Energy

李攀,胡俊豪

2025

5

Identification of ARMAX models with noisy input: A parametric frequency domain solution

IEEE Transactions on Signal Processing

宋圣霖,张二亮

2025

6

Investigations on multi-scale chaotic characteristics and hybrid prediction model for combustion system in a premixed lean-burn natural gas engine

Fuel

丁顺良(共通)

2025

7

Model simulation and multi-objective capacity optimization of wind power coupled hybrid energy storage system

Energy

丁顺良(共通)

2025

8

Operation optimization of multi-to-one alkaline hydrogen production system: Rolling optimization- based power allocation and parameter regulation

Fuel

丁顺良

2025

9

Decoupling the heating and reduction processes in solar-driven two-step thermochemical cycle by coupling it with thermal power generation

Energy

赵凯

2025

10

Synergistic Enhancement of Strength, Corrosion Resistance, and Stress Corrosion Cracking Resistance in WE43 Mg Alloy via T6 Treatment

Corrosion Science

王旭,邹云

2025

11

Innovative Designs of 3D Heat Sinks by Topology Optimization

ASME. J. Mech. Des

王定标,王光辉

2025

12

Optimal arrangements of inlet and outlet in topology liquid-cooled microchannel heat sink based on Multi-Objective optimization

Applied Thermal Engineering

王定标,王光辉

2025

13

Topology optimization of rectangular parallel plate heat exchanger unit

International Journal of Thermal Sciences

王光辉

2025

14

Numerical optimization and experimental study of helically coiled tube heat exchanger based on Entransy degeneration theory

Applied Thermal Engineering

王定标,王光辉

2025

15

Experimental and numerical study of plate heat exchanger based on topology optimization

International Journal of Thermal Sciences

王定标,王光辉

2025

16

How rearfoot length influences the dynamics of flat-footed passive walking robots?

International Journal of Mechanical Sciences

刘泽仪,饶晓波

2025

17

Experimental and numerical investigation on the aging behavior of CFZnL composites in salt spray environment

Thin-Walled Structures

黄金刚,侯玉亮

2025

18

Experimental and numerical investigation on the mechanical behavior of 3D star-shaped auxetic structure

Composite Structures

韩文杰,侯玉亮(共通),时建纬(共通)

2025

19

Self-healing effect on the impact-resistance of hybrid stitch toughening CFRP composites: Experimental and numerical studyAuthor links open overlay panel

Thin-Walled Structures

张臻臻,铁瑛

2025

20

A novel sandwich-structural cooling and heating system with high power, high COP and small size based on thermoelectric cooler

Energy Conversion and Management

张景双,赵华东

2025

21

Indentation deformation mechanism of combined-strengthened modified layer in low-alloy steel under the influence of hydrogen

Corrosion Science

王刚,李凌霄

2025

22

Enhancing surface integrity and corrosion resistance of 18CrNiMo7-6 gear steel via integrating carburized treatment and ultrasonic surface rolling process

Surface & Coatings Technology

王刚,彭振龙

2025

23

Study on the hydrogen embrittlement behaviour of ultrasonic surface rolling gradient structural materials under alternating stress

Materials Science and Engineering: A

王刚,李凌霄

2025

24

Magnetic Cell-Mimetic Droplet Microrobots with Division and Exocytosis Capabilities

Research

张伟伟

2025

25

磁性人工类细胞的仿生行为分析

哈尔滨工业大学学报

张伟伟,王成明

2025

26

18CrNiMo7-6 合金钢表面变质层准静态本构参数确定

机械工程学报

徐广涛,李凌霄

2025

27

Effect of hydrogen on low-cycle fatigue properties and the mechanism of hysteresis energy method lifetime prediction of X80 pipeline steel

Corrosion Science

李凌霄(通信)

2025

28

Multi-scale hydrogen embrittlement prediction model of low alloy steel based on multi-dimensional defect reconstruction

Engineering Fracture Mechanics

李凌霄

2025

29

Molecular dynamics of hydrogen-induced BCC/FCC phase transition and cracking in plastic deformation of X80 duplex pipeline steel

Engineering Failure Analysis

李凌霄(通信)

2025

30

Research on a novel adaptive generalized predictive control based on transcritical CO2 heat pump

Applied Thermal Engineering

秦翔,王定标

2025

31

Operation strategy optimization of wind hydrogen electrolysis system considering degradation and price fluctuation

Renewable Energy

敖运进

2025

32

Analysis
of heat transfer characteristics and optimization of variable-direction twisted
oval tubes with inserts

Applied Thermal Engineering

汤松臻

2025

33

Wear resistance enhancement of Inconel 718 via high-speed ultrasonic vibration cutting and associated surface integrity evaluation under high-pressure coolant supply

Wear

张银霞,彭振龙

2025

34

Startup characteristics of long direct-steam-generation loop in parabolic trough solar plant

Renewable Energy

王永庆

2025

35

Heat transfer characteristics of Taylor flow in a bottom-heated square microchannel: A 3D conjugate heat transfer numerical study

Applied Thermal Engineering

王长亮,靳遵龙

2025

36

Numerical Study on Fluid Flow Pattern Regulation and Heat Transfer Characteristics in Oval-pit Spiral Tube.

Applied Thermal Engineering

吴金星

2025

37

Enhanced performance of piezoelectric energy harvester by installing symmetrical flexible splitter plates

Mechanical Systems and Signal Processing

王军雷

2025

38

Soft-soft contact TENG using nonlinear coupling galloping phenomenon for harvesting wind energy

Nano Energy

王军雷, 康熙龙

2025

39

Design and optimization of a vertical shell-and-tube latent heat thermal energy storage system via discontinuous fins

Renewable Energy

汤松臻

2025

40

Numerical investigation on acid vapor condensation characteristics of honeycomb H-type finned tube heat exchangers with hexagonal fins

Applied Thermal Engineering

汤松臻

2025

41

Construction of Graphene/SWCNT network in NaCl-based phase change material toward efficient thermal energy storage

Applied Thermal Engineering

余银生

2025

42

Investigation of particle deposition characteristics in flue gas heat exchanger with variable-direction twisted-oval tubes

Applied Thermal Engineering

汤松臻

2025

43

Experimental investigation on thermal characteristics and performance enhancement of pulsating heat pipe with ultra-maximum hydraulic diameter

Applied Thermal Engineering

徐严严

2025

44

Analysis
of heat transfer performance and energy efficiency of the microchannel combined
with ultrasound and nanofluid

Applied Thermal Engineering

张东伟

2025

45

Dynamic fracture toughness and crack propagationmechanism of a heterogeneous heterostructured material under combinedstrengthening

Engineering Fracture Mechanics

徐广涛,李凌霄

2024

46

Complex dynamics of the passive biped robot with flat feet: Gait bifurcation, intermittency and crisis

Mechanism and Machine Theory

刘泽仪,饶晓波

2024

47

Exploring the enhanced energy-absorption performance of hybrid polyurethane(PU)-foam-filled lattice metamaterials

International Journal of Impact Engineering

李霜,侯玉亮

2024

48

A multiscale strategy for exploring the mechanical behavior of 3D braided composite thin-walled cylinders

Thin-Walled Structures

刘雨桐,侯玉亮

2024

49

Low-velocity impact and compression after impact behaviors of rib-stiffened CFRP panels: Experimental and numerical study

Aerospace Science and Technology

侯玉亮,孟亮(共通),许英杰(共通)

2024

50

Optimal placement of structural sensors in complex service environments using data relational analysis

Mechanical Systems and Signal Processing

张钰奇,铁瑛

2024

51

Surface integrity and corrosion resistance of 18CrNiMo7-6 gear steel subjected to combined carburized treatment and wet shot peening

Surface & Coatings Technology

王刚,(彭振龙)

2024

52

Gradient
residual stress evolution and its influence on fatigue life under
combined carburising heat treatment and ultrasonic surface rolling
process

Engineering Fracture Mechanics

王刚,(彭振龙)

2024

53

Mixed-integer linear programming and composed heuristics for three-stage remanufacturing system scheduling problem

ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE

王闻杰,田广东(共通),李成(共通)

2024

54

More mixed-integer linear programming models for solving three-stage remanufacturing system scheduling problem

COMPUTERS & INDUSTRIAL ENGINEERING

王闻杰,田广东

2024

55

Multi-objective optimization of energy-efficient remanufacturing system scheduling problem with lot-streaming production mode

EXPERT SYSTEMS WITH APPLICATIONS

田广东,王闻杰

2024

56

Effect of hydrogen on microstructure evolution and properties of high-strain pipeline steel under cyclic strain loading

Corrosion Science

李凌霄(通信)

2024

57

Experimental verification of the novel transcritical CO2 heat pump system and model evaluation method

Renewable Energy

秦翔,王定标

2024

58

Enhancement of aromatics and syngas production by co-pyrolysis of biomass and plastic waste using biochar-based catalysts in microwave field

Energy

李攀

2024

59

Exploring the characteristics of coke formation on biochar-based catalysts during the biomass pyrolysis

Fuel

李攀

2024

60

Characteristic analysis and kinetics description for biochar-based catalysts coking during the biomass catalytic pyrolysis

Fuel

李攀

2024

61

Investigation of products characteristics from microwave catalytic pyrolysis of furfural residue based on the effects of Fe/Mn modified biochar

Industrial Crops & Products

李攀,胡俊豪

2024

62

Production of MAH-rich bio-oil from co-pyrolysis of biomass and plasticsusing carbonized MOF catalysts under microwave irradiation

Energy

李攀

2024

63

Characterization of the decomposition behaviors of catalytic pyrolysis of alkaline lignin with the addition of different concentrations of potassium

Journal of the Energy Institute

李攀,胡俊豪

2024

64

Performance evaluation of a novel disk-type motor using ultrasonic levitation: Modeling and experimental validation

Tribology International

石明辉

2024

65

Ultrathin flexible heat pipes with heat transfer performance and flexibility optimization for flexible electronic devices

Renewable and Sustainable Energy Reviews

孙亚隆,汤勇(通信),Kian Jon Chua(通信)

2024

66

超薄柔性热管蒸汽通道微压印成形及传热性能研究

孙亚隆,唐恒

2024

67

盘型声流超声电机驱动机理分析及实验研究

西安交通大学学报

石明辉

2024

68

Energy concentration pipe based on passive jet control for enhancing
flow induced vibration energy harvesting

Energy Conversion and Management

王军雷,孟宪宗

2024

69

Study on multi-power-level configuration scheme and scheduling strategy for multi-stack alkaline water electrolysis system in off-grid wind power scenario

Energy Conversion and Management

丁顺良

2024

70

Study on the synergistic regulation strategy of load range and electrolysis efficiency of 250 kW alkaline electrolysis system under high-dynamic operation conditions

eTransportation

丁顺良(共通)

2024

71

Experimental studies on dynamic performance of 250-kW alkaline electrolytic system

Journal of Power Sources

丁顺良(共通)

2024

72

Enhancing the efficiency of solar parabolic trough collector systems via cascaded multiple concentration ratios

Journal of cleaner production

赵凯

2024

73

4E analysis and parameter study of a solar-thermochemical energy storage CCHP system

Energy Conversion and Management

张东伟

2024

74

Parametric study and optimization of H-type finned tube heat exchangers with honeycomb arrangement using Taguchi method

Applied Thermal Engineering

汤松臻

2024

75

Experimental study on heat transfer performance enhancement of pulsating heat pipes induced by surfactants

Applied Thermal Engineering

张东伟

2024

76

Numerical investigations on electrolytic performance of proton exchange membrane electrolysis cell with parallel flow field

Applied Thermal Engineering

周俊杰

2024

77

Effects of mechanical vibration on melting characteristics of latent thermal energy storage units using the dynamic mesh method

Applied Thermal Engineering

郭茶秀

2024

78

Batch production prediction for the mechanical cutting industry based on process capability

Scientific Reports

徐广涛,彭振龙

2024

79

4E analyses of a novel solar-assisted vapor injection autocascade high-temperature heat pump based on genetic algorithm

Energy Conversion and Management

陈佳恒,王光辉

2024

80

Performance investigation of a novel photovoltaic-thermal vapor injection heat pump based on 4E analysis

Energy Conversion and Management

陈佳恒,王定标

2024

81

Heating and electricity generation performance investigation of a novel ejector enhanced photovoltaic-thermal heat pump

Energy

王永庆,陈佳恒

2024

82

Analysis of stream flow and its impact on thermal performance in shell-side of heat exchangers based on flow dead zone

Applied Thermal Engineering

王永庆

2024

83

Taylor bubble splitting, flow and coalescence in branching microchannels: An experimental and numerical simulation study

Chemical Engineering Journal

王长亮

2024

84

Preparation and characterization of furfural residue derived char-based catalysts for biomass tar cracking

Waste Management

白净,胡俊豪

2024

85

Preparation of low-nitrogen bio-oil from co-pyrolysis of waste tobacco stem
and corn stalk: Product characteristics and denitrogenation mechanism

Energy

白净,胡俊豪

2024

86

Investigation on steam co-gasification of torrefied biomass and coal: Thermal behavior, reactivity, product characteristic and synergy

Energy

胡俊豪

2024

87

Equivalent Circuit Analysis of a Nonlinear Vortex-Induced Vibration Piezoelectric Energy Harvester Using Synchronized Switch Technique

IEEE Transactions on Industrial Electronic

王军雷

2024

88

Dumbbell-shaped piezoelectric energy harvesting from coupled vibrations

International Journal of Mechanical Sciences

田海港,王军雷

2024

89

Enhanced flow induced vibration piezoelectric energy harvesting performance by optimizing tapered beam

International Journal of Mechanical Sciences


王军雷,田海港

2024

90

Experimental and three-dimensional performance analysis of a bio-inspired fish-ridge vertical axis wind rotor

Energy

王光辉

2024

91

Experimental study and optimization analysis of start control strategy for the transcritical carbon dioxide heat pump

Applied Thermal Engineering

王定标

2024


机械团学汇
Copyright© 2023All Rights Reserved. 郑州大学机械与动力工程学院版权所有