
张建伟,男,工学博士,副教授,博士生导师,河南省优秀青年科学基金项目获得者。研究方向为抗疲劳制造和高分子材料力学性能。主持国家自然科学基金项目2项,省部级项目3项。参研国家自然科学基金联合重点基金和河南省重大科技专项在内的多项国家级和省部级科研项目。在International Journal of Solids and Structures、Materials & Design、Mechanics of Materials等期刊发表论文30余篇。
1、基本情况
姓名:张建伟
性别:男
民族:汉
籍贯:河南省中牟县
职称:副教授
导师类型:博士生导师/硕士生导师
邮箱:zhangjianwei@zzu.edu.cn
2、教育背景
2012年9月——2016年9月 西南交通大学 固体力学 博士
2011年9月——2012年7月 西南交通大学 固体力学 硕士(硕博连读)
2007年9月——2011年7月 西南交通大学 工程结构分析 本科
3、研究领域
表面变质层力学性能表征方法、先进材料表面失效机理研究
4、科研项目:
[1] 主持国家自然科学基金面上项目,基于仪器化划痕技术的齿轮钢表面变质层温度相关非均匀塑性参数测试技术研究,2021年01月至 2024年 12月
[2] 主持国家自然科学基金青年科学基金项目,考虑基底和层间约束效应影响的高分子材料刮擦行为研究,2018年01月至 2020年 12月
[3] 主持2015年西南交通大学博士研究生创新基金,基于合理本构模型的非晶态高分子材料刮擦损伤机理研究
5、荣誉奖励
[1] 2022年6月,获得河南省教育厅科技成果奖一等奖
[2] 2021年7月,获得郑州大学优秀共产党员
[3] 2020年9月,获得郑州大学“三育人”先进个人
[4] 2020年4月,获得美国大学生数学建模竞赛H奖指导老师;
[5] 2019年9月,获得校级优秀本科毕业论文指导老师;
[6] 2017年10月,获批郑州大学校级青年骨干教师;
[7] 2015年10月,获得博士研究生国家奖学金;
[8] 2014年01月,入选西南交通大学第四届轨道交通拔尖创新人才;
[9] 2013年12月,获得孙训方奖学金。
6、学术成果
在抗疲劳制造(表面变质层力学性能表征方法)和高分子材料力学性能(高分子材料刮擦性能)已发表SCI/EI论文三十余篇,获得授权专利7项。
1、已发表论文
1. Zhang, J*., Qin, J., Li, Y., Lu, C., Liu, H., Zhao, M*. Extraction of the plastic properties of metallic materials from scratch tests using deep learning (2022) Mechanics of Materials, 175, 104502.
2. Zhang, J.*, Li, Y., Zheng, X., Wang, G., Zhao, M*. Determination of plastic properties of surface modification layer of metallic materials from scratch tests (2022) Engineering Failure Analysis, 142, 106754.
3. Zhao, S., Zhang, J.*, Li, Y., Liu, H., Wang, B., Zhao, M. An indentation method for determining the film thickness, Young's modulus, and hardness of bilayer materials (2022) Journal of Physics D: Applied Physics, 55 (27), 274002.
4. Liu, H., Zhang, J.*, Zhao, M., Lu, C. Determination of the Fracture Toughness of Glasses via Scratch Tests with a Vickers Indenter (2022) Acta Mechanica Solida Sinica, 35 (1), pp. 129-138.
5. Wang, B.B., Chen, H.K., Xu, G.T., Zhang, J.W., Zhao, M.H. A theoretical model for predicting the surface topography of inhomogeneous materials after shot peening (2022) International Journal of Advanced Manufacturing Technology, 119 (11-12), pp. 7533-7541.
6. 张建伟*,郑雪峰,孙博,高琛.退火对渗碳热处理18CrNiMo7-6合金钢划痕行为的影响.热加工工艺,已录用
7. 吴少洋,张建伟*,卢凤强,李元鑫,秦瑾鸿,18CrNiMo7-6 合金钢 J-C 损伤模型失效参数研究,郑州大学学报(工学版),已录用
8. 孙廷威,张建伟*,秦瑾鸿,赵思伟,李元鑫,基于机器学习确定膜基材料弹性模量的仪器化压痕方法,中国科学: 物理学 力学 天文学,已录用
9. 黄科臻,赵思伟,张建伟*,张小芳,彭俐荃,王秋菊.压头形状对高分子材料压痕和刮擦行为影响的实验研究[J].实验力学,2021,36(03):334-339.
10. Zhang, J.*, Zhao, S., Zhang, J. Influence of substrate and interfacial adhesion on the scratch resistance of poly(methylmethacrylate) (2020) Materials and Design, 195, 108984.
11. Yang, Z., Zhang, J., Zhu, Z., Jiang, C., Cheng, Q., Jiang, H. Mechanism of temperature rise due to crazing evolution during PMMA scratch (2020) International Journal of Solids and Structures, 199, pp. 120-130.
12. Jiang, C., Zhu, Z., Zhang, J., Yang, Z., Jiang, H. Constitutive modeling of the rate- and temperature-dependent macro-yield behavior of amorphous glassy polymers (2020) International Journal of Mechanical Sciences, 179, 105653.
13. Liu, H., Zhao, M., Lu, C., Zhang, J.* Characterization on the yield stress and interfacial coefficient of friction of glasses from scratch tests (2020) Ceramics International, 46 (5), pp. 6060-6066.
14. 王刚,宋建,张建伟,王冰冰.基于多晶体模型的18CrNiMo7-6合金钢本构参数确定[J].郑州大学学报(工学版),2020,41(02):38-43.
15. Jiang, C., Jiang, H., Zhang, J., Kang, G. Analytical model of friction behavior during polymer scratching with conical tip (2019) Friction, 7 (5), pp. 466-478.
16. Zhao, M., Xu, X., Liang, S., Zhang, J.* Characterization method of the layer thickness of surface residual stress based on instrumented indentation testing (2019) AIP Advances, 9 (9), 095024, .
17. Liu, H.T., Zhao, M.H., Zhang, J.* Fracture Properties of Surface Modification Layers Via a Modified Bi-Layer Beam Model (2019) Journal of Mechanics, 35 (4), pp. 499-511.
18. Zhang, J., Jiang, H., Jiang, C., Kang, G., Kan, Q., Li, Y. Experimental and numerical investigations of evaluation criteria and material parameters' coupling effect on polypropylene scratch (2018) Polymer Engineering and Science, 58 (1), pp. 118-122.
19. 程洁,梁昇,陈彬,龚海文,陈伟,张建伟*.温度循环老化对聚丙烯表面耐刮擦性能的影响[J].工程塑料应用,2018,46(09):112-116.
20. Jiang, H., Zhang, J., Yang, Z., Jiang, C., Kang, G. Modeling of competition between shear yielding and crazing in amorphous polymers’ scratch (2017) International Journal of Solids and Structures, 124, pp. 215-228.
21. Cheng, Q., Jiang, C., Zhang, J., Yang, Z., Zhu, Z., Jiang, H. Effect of thermal aging on the scratch behavior of poly (methyl methacrylate) (2016) Tribology International, 101, pp. 110-114.
22. Zhu, Z., Cheng, Q., Jiang, C., Zhang, J., Jiang, H. Scratch behavior of the aged hydrogenated nitrile butadiene rubber (2016) Wear, 352-353, pp. 155-159.
23. Zhang, J., Jiang, H., Jiang, C., Cheng, Q., Kang, G. In-situ observation of temperature rise during scratch testing of poly (methylmethacrylate) and polycarbonate (2016) Tribology International, 95, pp. 1-4.
24. Jiang, C.K., Jiang, H., Zhang, J.W., Kang, G.Z. A viscoelastic-plastic constitutive model for uniaxial ratcheting behaviors of polycarbonate (2015) Polymer Engineering and Science, 55 (11), pp. 2559-2565.
25. Zhu, Z., Jiang, C., Cheng, Q., Zhang, J., Guo, S., Xiong, Y., Fu, B., Yang, W., Jiang, H. Accelerated aging test of hydrogenated nitrile butadiene rubber using the time-temperature-strain superposition principle (2015) RSC Advances, 5 (109), pp. 90178-90183.
26. Jiang, C., Jiang, H., Zhu, Z., Zhang, J., Guo, S., Xiong, Y. Application of time-temperature-stress superposition principle on the accelerated physical aging test of polycarbonate (2015) Polymer Engineering and Science, 55 (10), pp. 2215-2221.
27. Zhang, J., Jiang, H., Kang, G., Jiang, C., Lu, F. A new form of equivalent stress for combined axial-torsional loading considering the tension-compression asymmetry of polymeric materials (2015) RSC Advances, 5 (89), pp. 72780-72784.
28. Jiang, H., Cheng, Q., Jiang, C., Zhang, J., Yonghua, L. Effect of stick-slip on the scratch performance of polypropylene (2015) Tribology International, 91, pp. 1-5.
29. 张建伟,熊英,郭少云,蒋成凯,朱忠猛,蒋晗.丁腈橡胶热处理过程的时间-温度-应力等效性[J].高分子材料科学与工程,2015,31(11):56-59.
30. 黄婧依,谷军杰,张建伟,蒋晗,康国政.聚碳酸酯的单轴棘轮行为研究[J].工程力学,2015,32(07):204-209+218.
31. Xi, C., Kang, G., Lu, F., Zhang, J., Jiang, H. An experimental study on uniaxial ratcheting of polycarbonate polymers with different molecular weights (2015) Materials and Design, 67, pp. 644-648.
32. Zhang, J., Jiang, H., Jiang, C., Kang, G., Lu, F. Accelerated ratcheting testing of polycarbonate using the time-temperature-stress equivalence method (2015) Polymer Testing, 44, 4407, pp. 8-14.
33. Lu, F., Kang, G., Jiang, H., Zhang, J., Liu, Y. Experimental studies on the uniaxial ratchetting of polycarbonate polymer at different temperatures (2014) Polymer Testing, 39, pp. 92-100.
34. Jiang, H., Zhang, J., Kang, G., Xi, C., Jiang, C., Liu, Y. A test procedure for separating viscous recovery and accumulated unrecoverable deformation of polymer under cyclic loading (2013) Polymer Testing, 32 (8), pp. 1445-1451.
35. Zhang, J., Jiang, H. Study of material parameters' effect on polymer scratch using SOM method (2012) Advanced Materials Research, 452-453, pp. 1420-1423.
36. 张建伟,王成桥,阚前华,蒋晗.高分子材料涂层碰撞剥落机理的有限元分析[J].四川大学学报(工程科学版),2012,44(S2):122-125.
37. 蒋成凯,张建伟,刘宇杰,蒋晗.锥形刮头的高分子刮擦表面摩擦分析[J].四川大学学报(工程科学版),2012,44(S2):45-48.
2、专利
[1] 张建伟,吴少洋,郑雪峰,赵思伟,秦国帅. 一种水平式防反弹冲击试验装置[P]. 实用新型专利.
[2] 张建伟,黄科臻,彭俐荃,王秋菊,张小芳,秦国帅. 一种用于在役材料在线检测的自走式便携划痕仪[P]. 发明专利.
[3] 魏耀富,程前,蒋晗,张建伟. 一种用于划痕试验仪器的自平衡可替换式刮头[P]. 发明专利
[4] 张建伟,刘宇杰,康国政,蒋晗,一种先进材料湿热环境循环拉伸压缩扭转一体化试验夹具,发明专利
[5] 张建伟,程前,蒋晗,康国政,卢福聪,一种可提供持续夹紧力的多试样平行实验夹具,实用新型专利
[6] 卢福聪,康国政,张建伟,蒋晗,刘宇杰. 一种基于杠杆原理的多功能材料试验夹具. 发明专利
[7] 卢福聪,康国政,刘宇杰,张建伟,蒋晗. 一种用于夹持微小试样的材料试验夹具. 发明专利.
7、毕业研究生
序号 |
姓名 |
年级 |
论文题目 |
硕博 |
1 |
刘海涛 |
2013 |
基于压痕/划痕技术的表面变质层力学性能测试方法研究(协助指导) |
博士 |
2 |
梁昇 |
2016 |
表层残余应力及其层厚的压痕测试方法(协助指导) |
硕士 |
3 |
许鑫鑫 |
2017 |
基于X射线/剥层法和压痕法的表面变质层残余应力测试(协助指导) |
硕士 |
4 |
郑雪峰 |
2018 |
基于划痕技术的表面变质层塑性参数测试方法研究(协助指导) |
硕士 |
5 |
赵思伟 |
2019 |
表征多层材料力学性能的压痕测试方法研究 |
硕士 |
6 |
吴少洋 |
2019 |
18CrNiMo7-6合金钢外圆及缺口磨削仿真研究与试验验证(协助指导) |
硕士 |
8、在读研究生
博士研究生 |
序号 |
姓名 |
年级 |
1 |
李元鑫 |
2022 |
硕士研究生 |
1 |
秦瑾鸿 |
2020 |
2 |
孙廷威 |
2021 |
3 |
张晨辰 |
2021 |
4 |
陆亚洲 |
2021 |
5 |
彭腾 |
2022 |
6 |
张倩琪 |
2022 |
7 |
张云龙 |
2022 |