[1] Research on film condensation heat transfer at the inside of spiral coil tube. Int. J. heat and mass transfer. 2020, 147:1-7(第1作者,JCR1区,EI/SCI收录) [2] Design method and software development for the spiral-wound heat exchanger with bilateral phase change. Applied Thermal Engineering,2020,166:1-8(第1作者,JCR1区,EI/SCI收录) [3] Process Calculation Method and Optimization of the Spiral-wound Heat Exchanger with Bilateral Phase Chang.Applied Thermal Engineering, 2018,1344:360-368(第1作者,JCR1区,EI/SCI收录) [4] Research on Film Condensation Heat Transfer of the Shell Side of the Spiral Coil Heat Exchanger. Int.J.heat and mass transfer. 2018, 125:1349-1355(第1作者,JCR1区,EI/SCI收录) [5] 3D simulation on the Unit Duct in the Shell Side of the ROD baffle heat exchanger,Journal of Shanghai University,2006,10(4):362-365(第1作者,EI收录) [6] 正弦波形管综合性能模拟及实验.化工进展,2017,36(8):2847-2853(第1作者,EI收录) [7] 内置双旋线换热管内流动与传热数值模拟,工程热物理学报,2014,35(8):1602-1605(第1作者,EI收录) [8] 螺旋肋片换热器强化传热数值分析及实验,工程热物理学报,2008,29(5):861-864(第1作者,EI收录) [9] 花瓣孔板纵流式换热器的研发及试验研究,高校化学工程学报,2008,22(2):205-209(第1作者,EI收录) [10] 折流杆换热器壳程湍流和传热的数值模拟,高校化学工程学报,2006,20(2):213-216(第1作者,EI收录) |