首页 > 科学研究 > 发表论文


1. Guo X, Wang X*, Li X, Jiang Y, Han S, Ma, L, Guo H, Wang Z, Li Q*, et al. Endothelial Cell Migration on Poly (ε-caprolactone) Nanofibers Coated with a Nanohybrid Shish-Kebab Structure Mimicking Collagen Fibrils. Biomacromolecules, 2020, 21, 3, 1202-1213 (一区Top)

2. Wang D, Xu Y, Li Q*, Lih-Sheng Turng*. Artificial small-diameter blood vessels: materials, fabrication, surface modification, mechanical properties, and bioactive functionalities. Journal of Materials Chemistry B, 2020, 8(9): 1801-1822. (二区,中美联合)

3. Wang D, Xu Y, Wang L, Li Q*Lih-Sheng Turng*, et al. Long-term nitric oxide release for rapid endothelialization in expanded polytetrafluoroethylene small-diameter artificial blood vessel grafts. Applied Surface Science, 2020, 507: 145028. (一区Top,中美联合)

4. Yan S, Xu Y, Lin Y J, Zhang Z, Zhang X, Li Q*, Lih-Sheng Turng*, et al., Ethanol-lubricated expanded-polytetrafluoroethylene vascular grafts loaded with eggshell membrane extract and heparin for rapid endothelialization and anticoagulation. Applied Surface Science, 2020, 511: 145565. (一区Top,中美联合)

5. Yan S, Napiwocki B, Xu Y, Zhang X, Wang X, Li Q*, Lih-Sheng Turng*, et al., Wavy small-diameter vascular graft made of eggshell membrane and thermoplastic polyurethane. Materials Science and Engineering: C, 2020, 107: 110311. (二区Top,中美联合)

6. Wang D, Wang X*, Li X, Jiang L, Li Q*, et al. Biologically responsive, long-term release nanocoating on an electrospun scaffold for vascular endothelialization and anticoagulation. Materials Science and Engineering: C, 2020, 107: 110212. (二区Top)

7. Hou J, Jiang J*, Guo H, Wang X, Li Q*, et al., Fabrication of fibrillated and interconnected porous poly (ε-caprolactone) vascular tissue engineering scaffolds by microcellular foaming and polymer leaching. RSC Advances, 2020, 10(17): 10055-10066.

8. Guo H, Jiang J*, Li Z, Hou J*, Wang X, Li Q. Solid-state supercritical CO2 foaming of PCL/PLGA blends: Cell opening and compression behavior, Journal of Polymers and the Environment, 2020, doi: 10.1007/s10924-020-01732-9.

9.  Wang L*, Jiang L*, Li S, Li Q. Shen C, et al., Influence of scale effect and injection speed on morphology and structure of the microinjection molded isotactic polypropylene parts. Polymers for Advanced Technologies, 2020, 1-11.

10. Jiang J, Jin Z, Li Z, Li Q*, L H Turng*, Fibrillated and highly interconnected porous PCL scaffolds by combination of supercritical foaming and leaching, ANTEC 2020 (中美联合)

11. Ma L, Li X, Guo X, et al. Promotion of Endothelial Cell Adhesion and Antithrombogenicity of Polytetrafluoroethylene by Chemical Grafting of Chondroitin Sulfate[J]. ACS Applied Bio Materials. 2019,3(2):891-901.

12. Li X, Ding C, Li X, et al. Electronic biopolymers: From molecular engineering to functional devices[J]. Chemical Engineering Journal. 2020,397中科院一区

13. Liu Y, Wang Y, Zhang M, et al. A new insight into formation of 3D porous biomaterials[J]. Journal of Materials Science. 2020,56(4):3404-3413. SCI二区

14. Nie K, Han S, Yang J, et al. Enzyme-Crosslinked Electrospun Fibrous Gelatin Hydrogel for Potential Soft Tissue Engineering[J]. Polymers (Basel). 2020,12(9): (中科院二区)

15. Qiao Y, Jalali A, Yang J, et al. Non-isothermal crystallization kinetics of polypropylene/polytetrafluoroethylene fibrillated composites[J]. Journal of Materials Science. 2020,56(4):3562-3575. (SCI二区,中加联合)

16. Ren J, Jiang J, Li Z, et al. Effect of Multi-Level Microstructure on Local and Bulk Mechanical Properties in Micro-Injection Molded PC/PET Blend[J]. Macromolecular Research. 2020,28(10):939-947.

17. Wang D, Xu Y, Lin Y J, et al. Biologically Functionalized Expanded Polytetrafluoroethylene Blood Vessel Grafts[J]. Biomacromolecules. 2020,21(9):3807-3816. (一区,中美联合)

18. Wang D, Xu Y, Wang L, et al. Expanded Poly(tetrafluoroethylene) Blood Vessel Grafts with Embedded Reactive Oxygen Species (ROS)-Responsive Antithrombogenic Drug for Elimination of Thrombosis[J]. ACS Appl Mater Interfaces. 2020,12(26):29844-29853. (中美联合)

19. Wang S, Dong X, Liu M, et al. High strength polyvinyl alcohol/polyacrylic acid-based hydrogels with multiple networks[J]. Polymer-Plastics Technology and Materials. 2020,60(4):392-404.

20. Wang S, Wu R, Zhang J, et al. PLA/PEG/MWCNT composites with improved processability and mechanical properties[J]. Polymer-Plastics Technology and Materials. 2020,60(4):430-439.

21. Lu K, Li X, Sun Q, et al. Solution-processed electronics for artificial synapses[J]. Materials Horizons. 2021,8(2):447-470. (中科院一区,中日联合)

22. Yan S, Li Y, Jiang Y-C, et al. Expanded polytetrafluoroethylene/silk fibroin/salicin vascular graft fabrication for improved endothelialization and anticoagulation[J]. Applied Surface Science. 2021,542. (一区,中美联合)


1. Wang D, Wang X, Zhang Z, Wang L, Li X, Li Q*, Lih-sheng Turng *, et al., Programmed Release of Multimodal, Cross-Linked Vascular Endothelial Growth Factor and Heparin Layers on Electrospun Polycaprolactone Vascular Grafts. ACS Applied Materials & Interfaces, 2019, 11(35): 32533-32542. (一区Top,中美联合)

2. Ruguang Wu, Shiwei Wang*,Yuting Leng, Qian Li*, Preparation, Structure, and Properties of Poly(ethyleneoxide)/Lignin Composites Used for UVA bsorption, Journal of Applied Polymer Science, 2019,137, 48593

3. Niu, ZWang X*Meng XGuo XXu, Y, Li Q*Shen C, Controllable fiber orientation and nonlinear elasticity of electrospun nanofibrous small diameter tubular scaffolds for vascular tissue engineering, Biomedical Materials, 2019, 14(3): 035006

4. Meng XWang X*Jiang YZhang BLi K*Li, Qian, Suture retention strength of P(LLA-CL) tissue engineered vascular grafts, RSC Advances, 2019, 9(37): 21258-21264

5. L X Wang*, D F Wang, L Jiang, N Bian, Q Li, C Y Shen, Influence of Process Parameters on the Morphologies of Micro-Injection Molded Polyformaldehyde Parts, International Polymer Processing, 2019, 34(3): 367-375

6. Wang LX*, Wang DF, Zhou YP, Li Q, Shen CY, Fabrication of open‐porous PCL/PLA tissue engineering scaffolds and the relationship of foaming process, morphology, and mechanical behavior, Polymers for Advanced Technologies2019, 30(10): 2539-2548

7. Y P Liu*, M N Zhang, H H Wei, Zhen Wang*, Jun Zen, Qian Li, The sunken morphology of poly(lactic acid) stereocomplex spherulite, Polymer International, 2019, 68(8): 1524-1530

8. Xiang Zhang*, Zhenxing Wang, Chuanyu Hou, Yu Shrike Zhang, Qian Li*, et al., Modeling and experimental investigation of polymer micro-part demolding from a Zr-based bulk metallic glass mold, Polymer Engineering & Science, 2019, 59(11): 2202-2210 (中美联合)

9. XU WT, Wang H, CAI SY*, MA HZ, Fixed-Grid Hole-Shape Optimization for Opening Structures by using Smoothly Deformable Implicit Curve, Advances in Mechanical Engineering, 2019, 11(2): 1687814019826676.

10. K K Zhang, J Jiang*, X F Wang, J H Hou, S H Sun, Q Li*, Fabrication of highly interconnected porous poly(ɛ-caprolactone) scaffolds with supercritical CO2 foaming and polymer leaching, Journal of materials science, 2019, 54(6): 5112-5126 (二区Top)

11. Wang L X*, Zhang Y, Jiang L, Li Q, Shen CY, Lih-Sheng Turng, Effect of injection speed on mechanical properties of isotactic polypropylene micro injection molded parts based on nanoindentation test, Journal of Applied Polymer Science, 2019,136(14):47329 (中美联合)

12. L Jiang, Y C Jiang, J Stiadle, X F Wang, L X Wang, Q Li*, Lih-Sheng Turng*, Electrospun nanofibrous thermoplastic polyurethane/poly(glycerol sebacate) hybrid scaffolds for vocal fold tissue engineering applications, Materials Science and Engineering C, 2019,94:740-749 (二区Top,中美联合)

13. Mi H Y, Jiang Y, Jing X, Li Q*, Lih-Sheng Turng* et al. Fabrication of triple-layered vascular grafts composed of silk fibers, polyacrylamide hydrogel, and polyurethane nanofibers with biomimetic mechanical properties. Materials Science and Engineering: C, 2019, 98: 241-249. (二区Top,中美联合)

14. Zheng Y C, Chang J, Wang L C, et al. Lysine demethylase 5B (KDM5B): A potential anti-cancer drug target. European journal of medicinal chemistry, 2019, 161: 131-140. (一区Top)

15. Shen D D, Suo F Z, Song Q M, et al. Development of formaldehyde dehydrogenase-coupled assay and antibody-based assays for ALKBH5 activity evaluation, Journal of pharmaceutical and biomedical analysis, 2019, 162: 9-15.



1. Jiang Y C, Wang X F, Xu Y Y, Qiao Y H, Guo X, Li Q*, Lih-S T*, et al., Polycaprolactone nanofibers containing vascular endothelial growth factor-encapsulated gelatin particles enhance mesenchymal stem cell differentiation and angiogenesis of endothelial cells, Biomacromolecules, 2018, 19(9): 3747-3753. (一区Top,中美联合)

2. Jiang J, Liu X*, Lian M, Pan Y, Liu C, et al. Self-reinforcing and toughening isotactic polypropylene via melt sequential injection molding, Polymer Testing, 2018, 67: 183-189 (一区Top, ESI高被引)

3. Jiang YC, Jiao H L, Lih-S T, Li Q*, Li W J*Endogenous biological factors modulated by substrate stiffness regulate endothelial differentiation of mesenchymal stem cellsJournal of Biomedical Materials Research Part A2018, 106(6): 1595-1603 (中美联合)

4. Sun S, Li Q, Zhao N, Jiang J, Hou J, Wang X, et al., Preparation of highly interconnected porous poly(ε-caprolactone)/poly(lactic acid) scaffolds via supercritical foaming, Polymers for Advanced Technologies, 2018, 29(12): 3065-3074

5. Wang X, Xu Y, Jiang Y, Jiang J*, Lih-S T, Li Q. Core/shell structure of electrospun polycarbonate nanofibers, Polymer Testing, 2018, 70: 498-502. (一区Top,中美联合)

6. Li X, Wang X*, Yao D, Jiang Y, Li Q*, et al. Effects of aligned and random fibers with different diameter on cell behaviors, Colloids and Surfaces B: Biointerfaces, 2018, 171: 461-467.

7. Zhao N, Lv Z, Ma J, Zhu C, Li Q, Fabrication of hydrophilic small diameter vascular foam scaffolds of poly (ε-caprolactone)/polylactic blend by sodium hydroxide solution, European Polymer Journal, 2018, 110: 31-40. (中加联合)

8. Lv Z, Zhao N, Wu Z, Zhu C, Li Q. Fabrication of novel open-cell foams of poly (ε-caprolactone)/poly (lactic acid) blends for tissue-engineering scaffolds, Industrial & Engineering Chemistry Research, 2018, 57(39): 12951-12958. (二区Top,中加联合)

9. Guo Y, Ma J, Lv Z, Zhao N, Li Q. The effect of plasticizer on the shape memory properties of poly (lactide acid)/poly (ethylene glycol) blends, Journal of Materials Research, 2018, 33(23): 4101-4112.

10. Wang S, Leng Y, Zhang G, Ma S, Li Q. Morphology design of isotactic polypropylene composites: From “sandwich” film to injection application, Journal of Thermoplastic Composite Materials, 2018, 31(9): 1252-1262.

11. Ma S, Wang S, Leng Y, Li Q, Hu G. Characterization and Finite Element Analysis of the Tensile Behavior of Electrospun Polymer Single Fibers, Macromolecular Materials and Engineering, 2018, 303(3): 1700593. (中法联合)

12. Liu Y, Wei H, Wang Z, Li Q*, Nan T. Simultaneous enhancement of strength and toughness of PLA induced by miscibility variation with PVA, Polymers, 2018, 10(10): 1178

13. Liu Y, Wei H, Wang J, Li Q*. Numerical Simulation of the Crack Formation in the Quenched Poly (llactic acid) Spherulites, Macromolecular Theory and Simulations, 2018, 27(1): 1700043.

14. Zhang X*, Li H, Wang Z, Kong X, Li Q*. The microfabrication of mold for polymer microfluidic devices with Zr-based metallic glass, Biomedical microdevices, 2018, 20(4): 96.

15. Tian N, Liu D, Wei H, Liu Y*. Crystallization of polycaprolactone with reduced entanglement, European Polymer Journal, 2018, 102: 38-44.

16. Zhang K, Li Q*, Hou J, Jiang J*, Gilchrist M D, Characterization of Filling Performances and Mechanical Properties of Micro Molded FeaturesANTEC 2018, 2018 (中爱联合)

17. Yan S, Zhang X, Li Q*, L S Turng*, Hierarchical Micro/Nanostructures of PLA Scaffolds for Medical Applications, ANTEC 2018, 2018 (中美联合)

18. Jiang L, Wang L, Wang N, Gong S, Li Q, Shen C, L S Turng, et al. Fabrication of polycaprolactone electrospun fibers with different hierarchical structures mimicking collagen fibrils for tissue engineering scaffolds, Applied Surface Science, 2018, 427: 311-325. (一区Top,中美联合)

19. Xiaomeng Li, Qingqing Sun, Qian Li, Naoki Kawazoe, Guoping Chen*, Functional Hydrogels With Tunable Structures and Properties for Tissue Engineering Applications, Frontiers in chemistry, 2018; 6: 499 (中日联合)

20. Jiang J, Wang S, Hou J, Wang X*, Li Q*, Liu G. Effect of injection velocity on the structure and mechanical properties of micro injection molded polycarbonate/poly (ethylene terephthalate) blends, Materials & Design, 2018, 141: 132-141 (一区Top)

21. Li H, Liu K, Zhao D, Wang M, Li Q*, Hou J. Multi-objective optimizations for microinjection molding process parameters of biodegradable polymer stent, Materials, 2018, 11(11): 2322.

22. Wang X, Salick M R, Gao Y, Jiang J, Li Q*, L H Turng*, Interconnected Porous Poly(ε­-caprolactone) Tissue Engineering Scaffolds Fabricated by Microcellular Injection Molding, Journal of Cellular Plastics, 2018, 54(2): 379-397 (中美联合)

23. Mi H Y, Jing X, Wang X, Li Q*, L S Turng*, et al. Manipulating the structure and mechanical properties of thermoplastic polyurethane/polycaprolactone hybrid small diameter vascular scaffolds fabricated via electrospinning using an assembled rotating collector, Journal of the mechanical behavior of biomedical materials, 2018, 78: 433-441. (中美联合)

24. Chen X Q, Jiang J, Wang X T, et al. Role and mechanism of Dvl3 in the esophageal squamous cell carcinomaEuropean review for medical and pharmacological sciences, 2018, 22(22): 7716-7725.

25. Wang S*, Leng Y, Zhang G, Li Q, et al. Morphology design of isotactic polypropylene composites: From “sandwich” film to injection application, Journal of Thermoplastic Composite Materials, 2018, 31(9): 1252-1262.




1. Zhang X, Luo Y, Li J,Dun B, Li Q*. An experimental investigation and modeling of micro array replication with Zr-based bulk metallic glass using a hot embossing process, International Journal of Machine Tools and Manufacture, 2017, 117: 11-22 (一区Top)

2. Jiang Y C, Jiang L, Huang A, Wang X, Li Q*, L H Turng*.Electrospun polycaprolactone/gelatin composites with enhanced cell–matrix interactions as blood vessel endothelial layer scaffolds, Materials Science and Engineering: C, 2017,71: 901-908. (二区Top,中美联合)

3. Xu Y, Gao Y, Wang X*, Jiang J, Hou J H, Li Q*, Internal Structure of Amorphous Electrospun Nanofiber: Oriented Molecular Chains, Macromolecular Materials and Engineering, 2017302717000541-7

4. Xu Y, Zhang X, Wang X*, Li X, Li Q*. Simultaneous enhancements in the strength, modulus and toughness of electrospun polymeric membranes, RSC advances, 2017, 7(76): 48054-48057.

5. Wang X, Gao Y, Xu Y, Li X, Jiang J, Han W*, Li Q*, et al. A Prerequisite of the Poly (εCaprolactone) SelfInduced Nanohybrid Shish–Kebab Structure Formation: An Ordered Crystal Lamellae Orientation Morphology of Fibers, Macromolecular Chemistry and Physics, 2017, 218(24): 1700414

6. Wang X, Gao Y, Li X Jiang J, Li Q*, L H Turng*, et al. Selective localization of graphene oxide in electrospun polylactic acid/poly (ε-caprolactone) blended nanofibers, Polymer Testing, 2017, 59: 396-403. (一区Top,中美联合)

7. Zhang J, Wang S*, Zhao D, Li Q*, et al. Improved processability and performance of biomedical devices with poly (lactic acid)/poly (ethylene glycol) blends, Journal of Applied Polymer Science, 2017, 134(33): 45194.

8. Ma S J, Wang S W, Zhang Q, Li Q. Improved Layer Mechanical Properties of Micro Injection Molded PP, International Polymer Processing, 2017, 32(1): 138-142.

9. Ma S, Wang S, Li Q, Leng Y, Hu G, et al. A novel method for preparing poly (vinyl alcohol) hydrogels: preparation, characterization, and application, Industrial & Engineering Chemistry Research, 2017, 56(28): 7971-7976. (二区Top封面,中法联合)

10. Yang Z, Si J, Cui Z*, Wang X, et al. Biomimetic composite scaffolds based on surface modification of polydopamine on electrospun poly (lactic acid)/cellulose nanofibrils, Carbohydrate polymers, 2017, 174: 750-759. (一区Top)

11. Zeng S, Ye J, Cui Z*, Wang X, et al. Surface biofunctionalization of three-dimensional porous poly (lactic acid) scaffold using chitosan/OGP coating for bone tissue engineering, Materials Science and Engineering: C, 2017, 77: 92-101. (二区Top)

12. Cui Z*, Lin L, Si J, Wang X,et al. Fabrication and characterization of chitosan/ogp coated porous poly (ε-caprolactone) scaffold for bone tissue engineering, Journal of Biomaterials science, Polymer edition, 2017, 28(9): 826-845.

13. Li X*, Ding J, Liu Y, et al. A new model for mesomorphic-monoclinic phase transition of isotactic polypropylene, Polymer, 2017, 108: 242-250.

14. Zhang K, Bai Y, Wang X, Li Q,et al. Surface modification of esophageal stent materials by a polyethylenimine layer aiming at anti-cancer function, Journal of Materials Science: Materials in Medicine, 2017, 28(8): 125

15. Li J, Zou D, Zhang K*, et al. Strong multi-functions based on conjugating chondroitin sulfate onto an amine-rich surface will direct the vascular cell fate for cardiovascular implanted devices, Journal of Materials Chemistry B, 2017, 5(42): 8299-8313.

16. Li J, Wu F, Zhang K*, et al. Controlling molecular weight of hyaluronic acid conjugated on amine-rich surface: toward better multifunctional biomaterials for cardiovascular implants, ACS applied materials & interfaces, 2017, 9(36): 30343-30358. (一区Top)





1. Li Q, Xu Y, Wei H, Wang X*. An electrospun polycarbonate nanofibrous membrane for high efficiency particulate matter filtration, RSC advances, 2016, 6(69): 65275-65281.

2. Zhang J, Wang S, Qiao Y, Li Q*. Effect of morphology designing on the structure and properties of PLA/PEG/ABS blends, Colloid and Polymer Science, 2016, 294(11): 1779-1787.

3. Zhang X, Wang Z, Li Q, et al. Strain Avalanches in Microsized Single Crystals: A Theoretical Study of the Relation between the Avalanche Size and Duration, Chinese Physics Letters, 2016, 33(9): 096401

4. Zhang X, Zhang X C, Li Q, et al. Strain Avalanches in Microsized Single Crystals: Avalanche Size Predicted by a Continuum Crystal Plasticity Model, Chinese Physics Letters, 2016, 33(10): 106401.

5. Zhang X, Zhang X, Shang F, et al. Second-order work and strain burst in single-crystalline micropillar plasticity, International Journal of Plasticity, 2016, 77: 192-213. (一区Top)

6. Li X, Liu Y, Tian X, et al. Molecular mechanism leading to memory effect of mesomorphic isotactic polypropylene, Journal of Polymer Science Part B: Polymer Physics, 2016, 54(16): 1573-1580

7. Si J, Cui Z*, Wang Q, Liu C*. Biomimetic composite scaffolds based on mineralization of hydroxyapatite on electrospun poly (ɛ-caprolactone)/nanocellulose fibers, Carbohydrate polymers, 2016, 143: 270-278. (一区Top)

8. Zeng S, Cui Z*, Yang Z, Si J, Wang X. Characterization of highly interconnected porous poly (lactic acid) and chitosan-coated poly (lactic acid) scaffold fabricated by vacuum-assisted resin transfer molding and particle leaching, Journal of Materials Science, 2016, 51(22): 9958-9970. (二区Top)

9. Zhang K, Wang X, Guan F, Li Q, Li J*. Immobilization of Ophiopogonin D on stainless steel surfaces for improving surface endothelialization, RSC advances, 2016, 6(115): 113893-113898.

10. Li Q, Wang X, Xu Y. Electrospun Polycarbonate (PC) Nanofibrous Membrane for High Efficiency PM2.5 Filtration, ICAFM 2016, 2016.

11. Cao W, Min Z, Zhang S, Jiang J, Shen C, et al. Numerical simulation for flowinduced stress in injection/compression molding, Polymer Engineering & Science, 2016, 56(3): 287-298.


1. Jiang J, Wang S*, Sun B, Ma S, Li Q*, Hu G. Effect of mold temperature on the structures and mechanical properties of micro-injection molded polypropylene, Materials & Design, 2015, 88: 245-251. (一区Top,中法联合)

2. Wang S, Wang Z, Zhao N, Jiang J, Li Q*. A novel morphology development of micro-injection molded isotactic polypropylene, RSC Advances, 2015, 5(52): 41608-41610.

3. Li Q, Zhang R, Shao C*, et al. Cold crystallization behavior of glassy poly (lactic acid) prepared by rapid compression, Polymer Engineering & Science, 2015, 55(2): 359-366.

4. Wang S W, Leng Y T, Jiang J, Li Q,et al. Competition between α and β Crystallization in Isotactic Polypropylene: Effect of Nucleating Agents Composition, International Polymer Processing, 2015, 30(3): 344-349.

5. Jiang L, Wang L, Li Q, et al. Morphology evolution for isotactic polypropylene: Experiment and simulation, Polymer Science Series A, 2015, 57(5): 552-564.

6. Zhang X, Fang G, Jiang T, et al. Effects of cavity size and density on polymer micro hot embossing, International Journal of Precision Engineering and Manufacturing, 2015, 16(11): 2339-2346.

7. Cao W, Wang T, Yan Y, Li Q,et al. Evaluation of typical rheological models fitting for polycarbonate squeeze flow, Journal of Applied Polymer Science, 2015, 132(29).

8. Zhang X*, Ma J, Fang G, Li Q, et al. Polymer micro molding with bulk metallic glass mold, Microsystem Technologies, 2015, 21(7): 1453-1457.

9. Zhang X*, Sun B, Zhao N, Li Q*, Hou J. Experimental study on the surface characteristics of Pd-based bulk metallic glass, Applied surface science, 2014, 321: 420-425. (一区Top)

10. Zhao N, Mark LH, Zhu C, Chul B*, Li Q*, et al.Foaming poly (vinyl alcohol)/microfibrillated cellulose composites with CO2 and water as co-blowing agents, Industrial & Engineering Chemistry Research, 2014, 53(30): 11962-11972. (二区Top,中加联合)

11. Wang X, Salick M R, Wang X, Han W, Li Q*, L H Turng*, et al. Poly (ε-caprolactone) nanofibers with a self-induced nanohybrid shish-kebab structure mimicking collagen fibrils, Biomacromolecules, 2013, 14(10): 3557-3569. (一区Top,中美联合)

12. Wang X, Zhao H, Turng L S*, Li Q*. Crystalline morphology of electrospun poly (ε-caprolactone)(PCL) nanofibers, Industrial & Engineering Chemistry Research, 2013, 52(13): 4939-4949. (二区Top,中美联合)

13. Wang L, Li Q, Zhu W, Shen C. Scale effect on filling stage in micro-injection molding for thin slit cavities, Microsystem technologies, 2012, 18(12): 2085-2091.