快凝处理Al-5Ti-B中间合金的组织变化及其细化效果, 特种铸造及有色合金,2015,35(5):548-552.
Rotation friction pressing riveting of AZ31 magnesium alloy sheet. Materials and Design, 2014,54: 414–424.
A New Joining Process for Magnesium Alloys Rotation Friction Drilling Riveting. Journal of Manufacturing Science and Engineering, 2013, 135: 031012-1-9.
Effect of hot humid environmental exposure on fatigue crack growth of adhesive-bonded aluminum A356 joints. International Journal of Adhesion & adhesive, 2013,40: 1-10.
Grain refining action of Ti existing in electrolytic low-titanium aluminum with Al-4B addition for superheated Al melt. Trans. Nonferrous Met. Soc. China, 2010, 20(6): 950-957.
Effects of Sc on microstructure and low-cycle fatigue properties of Al–Li alloy. Materials Science and Engineering A 2008,483-484: 448-451.
Al-B中间合金对铝合金晶粒细化机理的研究, 中国有色金属学报,2008, 18(6): 974-979.
B对电解低钛铝制备的6009铝合金微观组织的影响,特种铸造及有色合金,2008,28(1):15-17.
The grain refinement behavior of TiB2 particles prepared with in situ technology. Materials Science and Engineering: A. 2007,459( 1-2) : 238-243.
Effect of B/Ti Mass Ratio on Grain Refining of Low-titanium Aluminum Produced by Electrolysis, Materials Science and Engineering A, 2006, 416: 312-316.
Grain refinement of hypoeutectic Al-Si alloy prepared with ELTA by Al-4B master alloy, Trans. Nonferrous Met. Soc. China, 2006, 16: s1342-s1345.
The grain refining action of fine TiB2 particles in the electrolytic low-titanium aluminum with Al-4B addition. Materials Science and Engineering A 2006,427(1-2): 148-153.
钪对铝锂合金时效硬化行为的影响, 材料热处理学报,2005,26(2):61-64.
电解加钛与熔配加钛对工业纯铝晶粒细化的作用, 中国有色金属学报,2004, 14(2): 250-254.
加钛和加硼方式对铝合金的晶粒细化及其衰退行为的影响,中国有色金属学报, 2004, 14(9): 1557-1563.
淬火速率对砂铸Al-7Si-0.4Mg合金拉伸性能及疲劳裂纹扩展行为的影响, 中国有色金属学报, 2001, 11(SI): 23-26.