个人简历：
丁春风，群众，博士，郑州大学商学院初聘副教授。2026年1月毕业于南京理工大学经济管理学院，获管理学博士学位。获评南京理工大学2024年度优秀博士培养对象。曾赴英国兰卡斯特大学进行为期一年的联合培养。主要研究方向为质量管理与质量工程、先进制造智能质量设计、人机协作智能制造等。聚焦于复杂制造环境下的质量设计与智能决策，致力于将数据驱动方法与工程实践相结合。主持江苏省研究生科研与实践创新计划项目1项，参与国家自然科学基金重点项目1项、面上项目3项。先后在《Reliability Engineering & System Safety》、《Aerospace Science and Technology》、《Simulation Modelling Practice and Theory》、《International Journal of Production Research》、《Computer & Industrial Engineering》和《工业工程与管理》等国内外权威期刊发表学术论文10余篇。
教育经历：
2019. 9-2026. 1 南京理工大学管理科学与工程硕博连读
2024. 6-2025. 6 兰卡斯特大学机械工程 联合培养
2015. 9-2019. 6 安徽工业大学工业工程本科
科研成果：
论文：
[1]Ding Chunfeng, Wang Jianjun*, Zhang Suying, Yang Shijuan, Ma Yizhong. (2025). A novel active learning stochastic Kriging metamodel for improving reliability and stability of additive manufacturing processes.Reliability Engineering & System Safety, 260, 111043.(中科院1区Top，ABS 3)
[2]Ding Chunfeng,Wang Jianjun*, Chen Xiaoying, Feng Zebiao, Ma Yan. (2025). Robust parameter design for rocket boosters using deep Gaussian process.Aerospace Science and Technology, 161, 110143. (中科院1区Top)
[3]Ding Chunfeng,Andrew Kennedy, Huang Yuze*. (2025). Multi-objective optimization of the laser powder-bed fusion process of 17-4 PH stainless steel: Balancing quality and processing rate.Optics and Laser Technology, 189, 113073. (中科院2区Top)
[4]Ding Chunfeng,Wang Jianjun*, Tu Yiliu, Ren Xiaolei, Chen Xiaoying. (2024). Robust parameter design for 3D printing process using stochastic computer model.Simulation Modelling Practice and Theory,132, 102896. (仿真科学与技术领域T1级期刊，中科院2区，ABS 2)
[5]Ding Chunfeng,Wang Jianjun*, Ma Yan, Tu Yiliu (Pual), Ma Yizhong. (2024). Multi-objective Bayesian modeling and optimization of 3D printing process via experimental data-driven method.Quality and Reliability Engineering International, 40(4), 2096-2115. (中科院3区)
[6]丁春风,汪建均*.基于Kriging模型的稳健参数设计.系统工程与电子技术, 2023, 45(07): 2269-2279. (仿真科学与技术领域T3级期刊，EI)
[7]Chen Xiaoying, Wang Jianjun*,Ding Chunfeng, Wang Hengliang. (2026). A novel functional multi-response bayesian modeling and optimization approach with batch effects and its application in 3D printing.Computers & Industrial Engineering, 214, 111899. DOI:https://doi.org/10.1016/j.cie.2026.111899(中科院2区Top，ABS 2)
[8]Zhang Suying, Hu Xuelong, Philippe Castagliola, Li Zhonghua, Wang Jianjun,Ding Chunfeng. (2025). Real-time monitoring of linear profiles using a self-starting scheme with likelihood ratio.Quality Technology & Quantitative Management, 1–29.DOI:10.1080/16843703.2025.2515374(中科院2区)
[9]Chen Xiaoying, Wang Jianjun*,Ren Xiaolei,Ding Chunfeng. (2024). Bayesian modeling and optimization for split-plot experiments with multiple responses.Computers & Industrial Engineering, 197, 110546. (中科院2区Top，ABS 2)
[10]Chen Xiaoying, Wang Jianjun*,Ding Chunfeng, Yang Shijuan. (2024). Multi-response robust parameter design based on Bayesian mixed effects model.Applied Mathematical Modelling, 127, 752-766. (中科院2区Top)
[11]Zhai Cuihong, Wang Jianjun*, Tu Yiliu, Chang Gang,Ren Xiaolei,Ding Chunfeng. (2023). Robust optimization of 3D printing process parameters considering process stability and production efficiency.Additive Manufacturing, 71, 103588. (中科院1区Top)
[12]Yang Shijuan, Wang Jianjun*, Tu Yiliu, Han Yunxia, Ren Xiaolei,Ding Chunfeng, Chen Xiaoying. (2023). Robust multi-response surface optimisation based on Bayesian quantile model.International Journal of Production Research, 61(10), 3260-3278. (中科院2区Top，ABS 3)
[13]任晓蕾,汪建均*,丁春风,翟翠红.基于贝叶斯组合建模的非正态响应稳健参数设计.工业工程与管理, 2024, 29(03): 115-126. (FMS T2)
[14]翟翠红,汪建均*,马义中,冯泽彪,任晓蕾,丁春风.考虑熔融沉积成型工艺稳定性的参数优化设计.机械工程学报, 2023, 59(23): 331-342.
[15]Xu Ning, Wang Jianjun*,Ding Chunfeng, Ren Xiaolei. Robust parameter design of functional response for Additive Manufacturing process.27th ISSAT RQD Conference Proceedings, 2022: 219-225. Accession number: 20223912784068.
主持项目：
[1]江苏省研究生科研与实践创新计划项目“面向增材制造过程的序贯优化设计与不确定性量化(批准号：KYCX22_0501)”，研究时间：2022.04-2023.03，主持，已结题。
获得奖项：
[1]南京理工大学2024年度优秀博士培养对象。
